USB-CIF02 + is a serial port connection and peripheral signal conversion Isolated programmed through the USB interface cable, the driver in the control operation of the computer, will simulate a COM interface to the computer's USB interface to various existing programming software, communications software and monitoring software and other applications. Working power of this cable from the USB port and by the DC / DC isolated power supply, no longer on the converter box (TX- sent; PWR- power; RX- accepted) PLC port powered by the transceiver status LED indicates data.
USB-CIF02 + isolated programming cable for Omron PLC, can be directly connected CQM1, CPM1, CPM1A, CPM2A, CPM2B, CPM2AH, C200HS, C200HX / HG / HE and SRM1 series PLC peripheral port;
For CS / CJ, CQM1H and CPM2C series PLC, please choose USB-CN226 + programming cable, but also by CS1W-CN114 adapter cable before using USB-CIF02 +.
Interface: USB + 20 iron needle.
NOTE: USB-CIF02 + isolated cable PLC does not support the older models have C200H, without no support behind the letter H.
Features and Specifications:
Support USB-CIF02 + isolated operating system: WIN-2000 / WIN-XP / WIN7 / WIN8.
Support USB-CIF02 + Isolated programming software version: CX-Programmer V5.0 and above.
Fully compatible with 1.1 or USB 2.0.
USB bus-powered, the current consumption of about 70mA.
Baud Rate: 300bps ~ 1Mbps standard automatic baud rate adaptation.
Support UART data format: data bits: 7, 8, stop bits: 1, 2 Parity: odd / even / no parity.
Cable length: 3 m.
Instructions:
USB-CIF02 + isolated programming cable need to install USB device driver to use, these drivers are included on the CD that came with the product for sale, see the screen tutorial to install the driver on the CD, not repeat them here.
After the driver installation is complete, USB-CIF02 + isolated programming cable corresponding COM port in the Windows Device Manager, simply select the COM port in the programming software or other application software and keep other communication parameters using the default settings next use the same programming cable with the traditional RS232 interface.