CS1W-CIF31 + is truly isolated USB to RS232 interface converter, under control of the driver running on the computer, the computer's USB interface simulation into traditional RS232 serial port (known as COM interface), thus various existing programming software communications software and monitoring software and other applications. Working power cable from the USB port and by the DC / DC isolated power supply, a converter box (TX- sent; PWR- power; RX- accepted) transceiver status LED indicates data.
CS1W-CIF31 + Isolated RS232 port cable standard DTE interface (DB9M needle seat, the same as the computer's serial port and RS232), which signals are arranged as follows:
PIN1: DCD
PIN2: RXD
PIN3: TXD
PIN4: DTR
PIN5: GND
PIN6: DSR
PIN7: RTS
PIN8: CTS
PIN9: RI
CS1W-CIF31 + isolated cable did very well RS232 serial port emulation, and even direct hardware I / O operations, application programmers who, like access to the same physical RS232 port. CS1W-CIF31 + isolated cable supports most of the traditional PLC programming cable.
Features and Specifications:
Support CS1W-CIF31 + isolated operating system: WIN2000 / WINXP / WIN7 / WIN8
Complete speed USB V1.1 and 2.0
USB bus powered, with current consumption 70mA
Baud Rate: 300bps ~ 1Mbps standard automatic baud rate adaptation
Support UART data format: data bits: 7, 8, stop bits: 1, 2 Parity: odd / even / no parity
Working temperature: -20 to + 75 degrees Celsius
Cable length: 1 m