Product Category: Battery Holders丨Battery Mounts丨 Coin Cell Holders丨 Battery Contacts丨Battery Retainers丨Battery Clips 丨Battery Snaps丨SMD/SMT Coin Cell Battery Holders 丨Button Battery Holder Case Box Case
Coin Battery Holder・Coin Cell Holder・Button Cell Holder (CR498・ CR503・CR1058・CR1220・CR1225・CR1620・CR1632・CR2016・CR2032・CR2330 ・CR2430・CR2450・CR2477)
CR2430 lithium coin cell Holders DIP/Thru Hole Mount (THM)
1. Material:
a. Housing: PBTVO+GF BK
b. Contact: C2680
(Surface Plating: Sn 10u" )
See Ordering Information
2. Electric:
a. Contact Resistiance: 30 Milliohms Max
b. Insulation Resistance: 1000 MEGA OHMS Min
c. Dielectric Voltage: 500V AC One Sea Level
d. Operating Temperature: -55°To 105°
Coin Cell Holders for CR2430 THM
Length: 29.3mm
Width: 26.6mm
Height: 9.5mm
Pin width: 0.8mm
CR2430 Holder with PC pins Lithium Coin Cell Thru-Hole Mount Holders Install Diagram
Feature of PCB mountable CR2430 coin cell holders
Low profile for high density packaging
Reliable spring tension contacts assure low contact resistance
Retains battery securely to withstand shock and vibration
Rugged construction, light weight
Compatible with vacuum and mechanical pick & place systems
Base material UL rated 94V-0. Impervious to most industrial solvents
Clearly marked polarities to help guard against improper insertion
application of CR2430 Coin Cell Holders DIP:
medical equipment, digital toys, industrial control boards, fire protection, etc.
How to identify the positive and negative poles of the button battery holder?
Usually, the button battery marked with "+" is the positive electrode, and the back is the negative electrode; the shell at the edge of the button battery is also the positive electrode, so most button batteries loaded in the button battery holder have the positive electrode facing up, because the side end of the button battery holder has metal The shrapnel jams the button battery to prevent it from coming out. This is the positive electrode metal shrapnel. The shrapnel will be close to the edge of the positive electrode of the button battery. Due to the large-area electrode contact of the positive electrode metal shrapnel, the stability of the electrode contact is effectively improved; if the button battery is positive and negative If the pole is swapped, the battery can also be stuck, but the battery is short-circuited.
Electric Connectors Manufacturer : ATKCONN ELECTRONICS CO.,LTD
Main Product Range: Connectors丨Wire Harness丨Board to Board Connector丨Wire to Board Connector丨Battery Holders丨Industrial Connector
FAQ
Q: What’s
your MOQ?
A: If we have the products in stock, it will be no MOQ. If we
need to produce, we can discuss the MOQ according to customer’s exact
situation.
Q: What’s
the MOQ for your products?
A: At
least $1000
Q: How long is your delivery
time?
A:
The general delivery time is 15-45 days after receiving your order
confirmation. Other, if we have the goods in stock, it will only take 1-2 days.
