Product Introduction:
Product Category: Battery Holders丨Battery Mounts丨 Coin Cell Holders丨 Battery Contacts丨Battery Retainers丨Battery Clips 丨Battery Snaps丨SMD/SMT Coin Cell Battery Holders 丨Button Battery Holder Case Box Case
Coin Battery Holder・Coin Cell Holder・Button Cell Holder (CR498・ CR503・CR1058・CR1220・CR1225・CR1620・CR1632・CR2016・CR2032・CR2330 ・CR2430・CR2450・CR2477)
DIP Horizontal Coin Cell Holder for CR1220 Battery Specification
|
Description
|
DIP Horizontal Coin Cell Holders
For CR1220
CR1220 Button Battery Holder DIP
Battery Socket for CR1220
CR1220 Coin Cell Battery Holder
Coin Cell Battery Holder for Lithium CR1220
CR1220 Battery Holder DIP 3V One Cell 2PIN CR1225 CR 1220 Coin Button Cell
Battery Box for CR1220
CR1220 Battery Holder DIP Battery Connector Plug-in Battery Base
|
|
Type
|
Round Battery Holder
|
|
Model No./Part No:
|
BT-S-SN-R-CR1220B
|
|
Plastic
|
|
|
Material
|
PBTVO+GF BK
|
|
Flammability
|
UL 94V-0
|
|
Metal
|
|
|
Material
|
Gold-plating over nickel-plated
phosphor bronze
|
|
Termination
|
Surface mount
|
|
Height Above PCB
|
4.00 mm
|
|
Rating
|
3.0V
|
|
Color
|
Black/Brown
|
|
Number of cells
|
1 cells
|
|
Battery
|
CR1220
|
|
Mfr
|
ATKCONN ELECTRONICS CO.,LTD
|
Packaging
|
Tray, Tape, Reel
|
|
RoHS
|
Compliant
|
|
|
Also lead-free solder process
compatible
|
|
Operating
Temperature:
|
-25ºC~+85ºC
|
1. Material:
a. Housing: PBTVO+GF BK
b. Contact: C5191
c. Surface Plating: Sn 10u"
2. Electric:
a. Contact Resistance: 30 Mlliohms Max.
b. Insulation Resistance: 1000 Mega Ohms Min.
c. Dielectnic Voltage: 500 V AC One Sec Level
d. Operating Temperature: -55° To +105°
R: 7.5mm
Height: 8.04mm
Pin length: 3.0mm
Number 2 apperance for the product: 180° type, we also have SMT and 90° types, when you place order on us, please inform us the exact apperance type you want.
Number 3 contact plating: tin type, we also have gold flash plate, when you place order on us, please tell us the exact contact plating way you want.
Number 4 packing method: tape & reel packing, we also have tin plate, when you place order on us, please tell us the packing method you want.
Number 5 product number: CR1220B
Coin Cell Holders for CR1220 Install Diagram
Feature of Antenk's Button Cell Battery Holder for CR1220 Battery
Button battery holder can help you to save mounting space on PCB, it is suited for high density PCB packaging.
High quality phosphor bronze have perfect electrical conductivity and low-resistance rate .
Nickel plated have good corrosion resistance to improve anti-oxidative capacity .
Mounting Type : SMT (surface mount) or THM (through-hole mount)
Button battery holder accommodation space, button battery is a key component in many micro instruments;
Button battery holder cost, common plastic materials such as LCP, PPS, PBT, metal shrapnel materials such as iron, steel, copper (metal shrapnel plating treatment such as nickel, tin, gold), temperature resistance, corrosion resistance, drop, and electrical stability of different materials There are differences in sex and exquisite appearance;
If there is a requirement for PCB space, you can choose battery shrapnel (pure hardware), but the positive and negative electrodes of the battery shrapnel are divided into two accessories separately, adding a step to the assembly, such as individual remote control, choose positive battery shrapnel, negative shrapnel or use immersion gold , nickel, tin process.
ATKCONN ELECTRONICS CO.,LTD Products
CR1220 Coin Battery Holder manufacturer & supplier
Main Product Range: Connectors丨Wire Harness丨Board to Board Connector丨Wire to Board Connector丨Battery Holders丨Industrial Connector
FAQ
Q: Which payment form you can accept?
A: T/T,
Western Union, PayPal etc. We
accept any convenient and swift payment term.
Q: Which
certificate do you have?
A: CE, FDA and ISO19001,ISO14001,IATF16949.
Q: Do
you have the test and audit service?
A: Yes, we can assist to get the designated test report for
product and the designated factory audit report.
