Quantity(Piece/Pieces) | 1 ~ 1000 | >1000 |
Est. Time(days) | 7 | To be negotiated |
If you finish the payment today, your order will ship out within the delivery date.
PA: Features: In an audio system, peripheral equipment and sidelines are complex and have a wide range of equipment, including compressors to make sounds strong, enhancer boosters, sound quality equalizers, filter or enhance certain Parameter equalizer for signal, feedback suppressor for whistling sound, limiter for protecting speaker unit, delay device for adjusting horn time difference, equalizer for compensating room frequency response defect... so many equipment, engineering Businesses are getting dizzy, not to mention the average user. The less experienced users, seeing the stars like the stars in the sky, the control buttons, the inexhaustible connecting lines, really can't start, it is daunting. DriveRackTMPA's design engineers understand the needs of the user and design a new generation of peripherals that combine all of these features. From now on, there is only one device from the mixer to the amplifier, a controller that includes all the basic peripheral functions. not only, The DriveRackTM PA is designed to take care of the convenience of the contractor and incorporates the technical parameters of most JBL speakers and Crowm amplifiers. The engineer only needs to follow the instructions of the Setup Wizard to sequentially select and input the model and working status of the device. The rest of the tedious work is automatically done by DriveRackTMPA. Connected to the RTA-M standard test microphone and Auto-EQ auto-balance function, DriveRackTMPA automatically adjusts the room balance to compensate for frequency noise defects caused by poor built-in sound. The fast-tracking feedback suppressor combined with precise output limiting protection is a boon to users and engineers, ensuring stable system operation. ● Stereo feedback suppressor 2×12 group fast tracking notch filter ● Dual 28-segment graphic equalizer ● Classic dbx compressor ● 120A subharmonic synthesizer ● 2 × 3, 2 × 4, 2 × 5, 2 × 6 frequency combination selection ● Stereo multi-parameter equalizer ● Stereo output limiter ● Speaker fine-tuning delay ● Pink noise generator ● Auto-EQ automatic room equalization compensation ● Set the JBL speaker and Crown amplifier's Setup Wizard function ● 25 factory presets / 25 user settings program memory ● 2 sets of input, 6 sets of output ● RTA-M real-time spectrum analysis microphone input is set on the panel with phantom power supply ● 24-Bit A/D converter provides dynamic range greater than 110dB ● dbx patent Type IVTMA/D conversion circuit ● Graphic LCD display Technical Parameters: Analog input: Number of inputs: (1 set) RTA microphone input (2 groups) line input Category: Electronic Balance / RF Filter, XLR Female Impedance: >40kΩ Input level: +20dBu Common mode rejection ratio: >45dB RTA microphone phantom power supply: +15VDC RTA microphone equivalent input noise: <-110dBu, 22Hz, -22kHz, 150Ω Analog output: Number of outputs: (6 groups) line output Category: Electronic Balance / RF Filter, XLR Impedance: 120Ω Output level: +20dBu A/D characteristics: Category: dbx Type IV Conversion Dynamic range: 110dB A weighted, 107dB without weighting Type IV dynamic range: 123dB, including transient signal, A weighting, 22kHz BW 121dB, with transient signal, no weight, 22kHz BW 115dB, including program signal, A weighting, 22kHz BW Sampling frequency: 48kHz A/D characteristics: Dynamic range: 112dB A weighted, 110dB no weight System characteristics: Dynamic range: >110dB without weighting, >107dB A weighting THD+ noise: 0.002%, +4dBu, 1kHz, 0dB input gain Frequency response: 20Hz-20kHz, ±0.5dB Channel crosstalk: <-110dB, generally 120dB Input to output crosstalk: <-110dB Delay: 10ms per output channel (60ms total)
$37.78~47.22
Min. Order:5