1) The cable drag chain can be used for such locations where repciprocating motions are required so that internally installed cables,oil pipes,gas tubes and water tubes can be draged and protected.
2) Each joint of cable drag chain can be opened up so as to facilitate repairs and maintenance.It gives low noises and is of anti-wearing while running.It can also be operated under high speed.
3)The cable drag chain have already extensively used in digital-controlled machine tools,electronic epuipement,machinery for stone industry,moulding injectors,manipulators,lifting and transport equipment and automatic warehouses,etc.
Cable chain selection principle
1.Inside height : choose the built-in cable, oil pipe, oil pipe, gas
pipe, etc, the thick a root as reference height, plus at least 10%
of the height space as a drag chain in high. If overlap according
to overlap the actual height reference height.
2.Inside width: choose relatively thick some cable, oil pipe, oil
pipe, pipe, pipe, etc., the sum of the outside diameter as drag
chain inside width reference, and had at least 10% of the width
space.
3.Bending radius: choose the built-in cable, oil pipe, oil pipe, gas
pipe, etc, the largest of the bending radius as a reference, and
had more than 10% of the space.
Cable chain built-in cable, oil pipe, oil pipe, pipe, water pipe
placement principles
Should leave 15% of the remaining space, let the built-in cable,
tubing can free activities, in the radius direction to drag chain
do not produce tension.
Diameter difference big wire should be separate laid, weight
average distribution, when necessary, usable space piece
separately.
In the high speed or high frequency operation, want to try to
make wire in level from each other and don't make the mutual
superimposed, in cable, pipe, oil pipe, etc more time suggest
using separation tablet.
