Lexia 3 Full Chip Descriptions
1. Lexia3 full chip interface latest version works for Citroen for Peugeot Diagnostic.
2. Update: By Link.
3. Support Multi-Language: English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech
4. It works for Coitroen/for Peugeot.
5. Versions: Lexia 3 V48, PP2000 V25, Diagbox V7.83, Firmware 921815C
6. Diagbox Software Update Password:
Diagbox V7.XX to V7.76: Scary01
Diagbox V7.76 to V7.82: Maitresox01
Diagbox V7.82 to V7.83: Very Simple!
please note: it only can work withWin 7 32bitsystem!
Lexia 3 Full Chip Features:
1. It is fit for most Peugeot cars from 1995.
2. Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
3. Supports Multi Languages:
PP2000 Software supported language: English, Chinese, German, French, Japanese, Russian, Arabia, Spanish, Turkish, Danish, Iranian, Greek, Israel, Hungary, Indonesian, Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatia, Thai.
Lexia3 Software supported language: English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech.
4. Lexia3 diagnostic scanner is a comprehensive cars diagnostic tool. You can do all as a authorized dealer does PP2000, lexia 3 diagnostic software allows you perform complete diagnostics of all from 1995 untill present models via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001)
5. Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface containsK-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
Support cars:
1. For Coitroen:
CZero/ C1/ C2/ C3/ C3 PICASSO/DS3/ CELYSEE/ C4/ C4 CACTUS/ C4 PICASSO/ DS4/ DS 5LS/ C5/ DS5 /C6 / C8/ CCROSSER/ C4 AIRCROSS/ NEMO/ BERLINGO/ JUMPY/ JUMPER/ AX/ SAXO/ BX/ ZX/ XSARA/ XANTIA/ XM/ EVASION/ C15/ FUKANGFUKANG 988/ ELYSEE/ C-ELYSEE(R3)/ C-TRIOMPHE/ C-QUATRE
2. For Peugeot:
iON/ 107/ 108 /206 207/ 207+/ 280/ 301/ HOGGAR/ 307/ 308/ RCZ/ 407/ 408/ 508/ 607/ 807/ 1007/ 2008/ 3008/ 4007/ 4008/ 5008/ BIPPER/ PARTNER/ EXPERT/ 106/ 205/ 306/ 309/ 405/ 406/ 605/ 806
Lexia 3 Full Chip Functions:
This software performs nearly ALL the functions like the original dealer diagnostic tool, Unlike other universal car scanner tools which only read fault codes, Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
1. Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2. Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3. Clear fault codes
This function clears all stored fault codes and other diagnostic information.
4. Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6. Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
7. Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
Hardware and Software Requirements:
1. Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Windows XP OR Windows 7 32Bits ONLY with the latest service pack installed. If customer requires, we can prepare ready to work PC.
2. Better to close the Anti-virus software on your computer. Because the Antivirus may recognize it as a type of virus, it will clear off all the software on the CD.
3. The CD contains a upgrade pack which is latest version V7.76, so please DO NOT upgrade it online by yourself.
Packing List:
1 x Main unit with extension OBD2 cable
1 x Long 9pin to USB cable
1 x Short 9pin to USB cable
1 x 16pin to Clip Cable
1 x Instruction for Installation and Activation DVD for PP2000
