Plastic Liquid mixing jet eductor nozzle with adjustable ball clamp spray nozzles
Material: Plastic,316ss
Nozzle Structure: one-piece construction without internal parts.
Spray Patterns: Hollow cone /full cone
Pressure Range: 1 to 4 bar (20 to 127 L/min).
Thread Size: 1/4'',3/8",1/2",3/4",1'',1.5'' BSPT
Mixing liquid eductors are used to agitate or mix liquids stored in tanks, pits, or sumps.Mixing Eductors use a unique venturi design which enables smaller pumps to circulate large volumes of tank solution.Designed on the basis of the Bernoulli theory, fluid under pressure is pumped into the nozzle through its large flow opening.
Performance data
Application:
Designed on the basis of the Bernoulli theory, fluid under pressure is pumped into the nozzle through its large flow opening. As the liquid exits the nozzle at high velocity, it draws surrounding solution through the nozzle’s "flow-through" chamber that's designed to eliminate internal material build-up.
The additional liquid flow mixes with the pumped solution, that is, the nozzle can pull in 4 gallons of surrounding solution for every 1 gallon pumped through the nozzle.
- Plating tanks
- Tank blending of oils
- Cleaning tanks
- Phosphating tanks
- E-coat tanks
- Fertilizer tanks
- Pulp tanks
- Sludge tanks
- Paint booths
- Anodizing tanks
- Cooling towers
- Decorative fountains
- Maintain solids in suspension
