Light strip difference:
(1) WS2811 is an external IC. One IC controls 3 lamp beads, at least 3 lamp beads at a time.
(2) WS2812 is a built-in IC, each lamp bead has an independent IC, which can be
controlled independently.
(3) WS2815 adopts upgraded version 2815IC and adopts parallel welding. The damage of some lamp beads will not affect the work of the next lamp bead. And the transmission speed is faster.
note:
(1) The price is only Led Strip, excluding power supply or Led controller!
(2) The LED light bar must work with the power supply and controller!
(3) There are solder joints every 0.5 meters, please pay attention!
(4) WS2815, WS2812, WS2811 are three different types of lamps, please pay attention when buying!
(5) WS2812 is a 5V light bar. WS2815 / WS2511 are 12V LED strips!
(6) WS2811 / WS2812 uses a 3pin connector. WS2815 uses 4pin connector.
WS2815 description
Main feature:
(1)One pixel damaged will not affect the other LEDs working.
(2)The power protection,if +12V and GND reverse polarity,the LED will not be burned.
(3) Dual signal wires version, signal can jump to transfer.
(4)The original electronic devices integrated,it does not cause virtual welding in the installation process.
Product parameters:
(1)LED light source: WS2815 LEDs
(2)same protocol as WS2813S with Dual-signal wires,so can be controlled by the same WS2811/ws2812 controllers
(3)Input voltage:DC12V;
(4)Power:30leds/m----9watt/meter
60leds/m----18watt/meter
144leds/m----43.2watt/meter
(5)LED resource:WS2815 led(5050 SMD RGB LED with built-in improved version of ws2811 ic)
(6)LED:each LED is separately controlled
(7)IC Type:improved version ws2815 IC(built inside the 5050 smd rgb led)
(8) IC:1 IC drives 1 led chip
(9)Pixels:30/60/144/meter;
(10)Pitch:16.6mm(1000/64);
(11)Grey scale:256
(12)Bits/color:8-bits/color;
(13)FPC Width:30leds/m----10mm
60leds/m----10mm
144leds/m----12mm
(14)FPC color:White PCB、blackPCB
(15)Protection rate：IP30/ IP65 /IP67
(16)Colors: Full color RGB, dream color changing;
(17)Cuttable:every LED is cuttable;
(18)Connector：4PIN connector terminal pair
WS2812 description
WS2811 description
Features:
(1) Flexible PCB ( IP30,IP65) With 3M adhesive tape on the back for easy installation.
(2) Energy saving and environment protection.
(3) High brightness 5050 SMD LED light strip.
(4) Solid-state, high shock or vibration resistance.
(5) Low power consumption, high intensity.
(6) Match the RGB controller and power supplier system.
(7) Wide viewing angle.
(8) Available in various single and RGB colors.
Product parameters:
(1) working voltage: DC 12V
(2) LED Source: SMD 5050 RGB
(3) LED Chip: Epistar
(4) LED QTY: 30/48/60 LED / M
(5) IC QTY: 10 /16 /20M
(6) Power: 9 /14.4 /18W /M
(7) Grey scale: 256 / Color
(8) Beam Angle: 120 °
(9) Cutability: 3 led / cutting (External 2811 ic, 1 ic control 3 LED)
(10) Color Mode: 133Pattern & 100 Speeds
(11) IP Grade: ip30 non -waterproof / ip67 waterproof
(12) Dimension: 5000 x 10 x 2.4mm
(13) Packaging: 12v ws2811 rgb strip + 3 pin connector.(AS you choose)
(14) Warranty: 2 years
Note:
The price is only Led Strip, Not Included Power Supply or Led Controller!
WS2811 Must Use DC12V Power Supply(Need Buy In Addition) AND Led Controller(Need Buy In Addition) to Control!
Customizable programming lights:
You can write your own lights as needed. If the light strips are arranged in the form of a screen, text, pictures, animations, etc. can be displayed.
Multiple dynamic effects:
One IC controls three LED lamp beads to form a loop (a group). The controller controls the IC chip to control the circuit on the FPCB circuit board to achieve different effects of LEDs: chase, running water, marquee, discoloration, breathing, Strobes
and more.
Light strip contrast：
There are solder joints every 0.5 meters, and each group of lamp beads can be cut separately.
