Product packaging:
10m LED strip light set include:
1 * LED Controller (Size: 16*5.5*2.5CM)
1 * Power Adapter(US/UK/EU)
2 * 5mdreamcolor RGBstrip light
2 * MotionSensors(Note that it is white)
Note: Except for the set, the power supply is not included.
This controller only has the function of lighting on both sides, and cannot create the effect of one-step lighting.
Important note: The positive and negative terminals of the power supply input of the controller cannot be reversed, the red wire V+ is connected to the positive electrode of the switching power supply, and the blue (or black wire) V- is connected to the negative electrode of the switching power supply.
Product Parameters:
Input Voltage: DC5-24V
PIR Sensing distance：16ft-32ft (5-10m)
Applicable Products：WS2812B、WS2811、1903 Dreamcolor LED light strips and so on
Product instructions:
For support or gengral help questions please contact us
Power the device, then the digital screen will display XX-L
(Red character), XX means the speed of the light strip effect(as the
1903 or DMX512 light strips).The button SPEED "- +" can be
adjusted according to best match the pace of people going up
and down the stairs.
There are 4 buttons on the controller panel, they are "SPEED-"
"SPEED + " "MODE" and "SET".
You can adjust the length of the light strip with chip(corresponding
number of stairs), the speed of the light strip color effect and light
transmission through the button "Set" .There are 6 options of the
button "Set", press this key to enter LXXX mode: set the pixel point
of the addressable light strip,the pixel point of the
light strip with chip(as 1903 or DMX512), then press "-+" keys to
adjust the speed; after do that, press the "Set" again to enter
Press the mode key: set the color of the light strip, XX is the light effect,
is also adjusted by the "-+" key:there are 7 options now,1-7
represents white, red, green, blue, yellow, purple and blue.
Complete this step, then press "Set" for the third time to LHXX
mode: the color changing speed of the light strip (as 1903 or
DMX512), do it as before(also are the "- +" keys).Finally,
press the "Set" button once again, return to the XX-L initial
display state. Now the controller will save the series of parameters
you just adjusted and can be used for next time
If you have any questions about the product, please consult online customer service. We will actively answer your questions.
