2.00mm(.079") Pitch Pin Header Dual Row Plastic SMT/SMD Straight

Product Introduction

PCB Mount Header,PCB Mount Receptacle

This type of device is engineered to provide signal connections between two printed circuit boards (PCBs). Our board-level interconnects are manufactured to give you more performance in the harshest applications. Our versatile contacts can be mounted on a single footprint so the customer can swap in a new size easily when a design change is needed.

 High quality and competitively priced PCB connectors for any situation. With over 160 standard parts in the ATKCONN Board to board range and a large element of customisation also available. Pitches ranging from 0.8mm to 5.08mm, selectable pin lengths, and insulator heights. Other features include locating peg options, shrouding, polarisation, keyed or elevated headers and sockets, with completely bespoke solutions possible. Board to board connectors are designed to connect printed circuit boards together without a cable. This connection can be permanent in the case of "hard soldering" (soldering a pin header to the PCB at both ends). This approach may be used in a "fit and forget" solution where no mating cycles are required. However, in most applications the printed circuit boards are required to be connected and disconnected to simplify assembly and allow design flexibility. Pin headers (male) and socket (female) connectors are used as a pair, one mating and unmating is described as a "mating cycle".

Connector Category: Board to Board Connectors丨PC Board Connectors丨Pin Header丨0.8mm(.031") Pin Header丨1.00mm(.039") Pin Header丨1.27mm(.050") Pin Header丨1.5mm Pin Header丨2.00mm(.079") Pin Header丨2.2mm Pin Header丨2.54mm(.100") Pin Header丨3.0mm Pin Header丨3.96mm(.156") Pin Header丨4.2mm Pin Header丨5.08mm(.200") Pin Header

 SPECIFICATION
Current Rating: 1.5 Amp
Insulation Resistance: 1000M ohms min
Contact Resistance: 20M ohms max
Dielectric Withstanding: AC500V
Operating Temperature: -65°C to +125°C
Contact Material: Brass
Insulator Material: PA6T,UL 94V-0 Black

In order to cater for differing PCB orientations, different board to board connector orientations have been developed to suit. In most application a pin header and socket would be used as a pair ro simplify assembly and allow disconnection/reconnection (mating cycle) as required.

To achieve a connection between a pair of parallel PCB's only one part combination can be used:

• Straight pin header and straight socket

To achieve a connection between a pair of horizontal PCB's only one part combination can be used:

• Right angled pin header and right angled socket

To achieve a connection between a pair of perpendicular PCB's, two combinations could be used:

• Straight pin header and right angled socket
• Right angled pin header and straight socket