How to install the ejector header?
Ejector header is widely used in electronic field. Therefore,
most equipment assembly personnel will face the problem of how to install the
horn connector. In fact, we only need to grasp three points.
1 Insertion direction
When the horn connector is fully inserted to U=14.2, it shall be
ensured to reach the specified 79483MD.
2 Perpendicular to the insertion direction
If the printed board or fixed board mounted connector is
floating mounted, the design of free and fixed board mounted connectors shall
give an adjustable displacement of at least 1mm (Note: for rigid mounting of
fixed board mounted
connectors, the mounting frame must have a strict tolerance.)
3 Inclination
The
design of free and fixed board mounted connectors allows inclination error,
with longitudinal axis of ± 4 ° and
transverse
axis of ± 4 °.
Connector Category: Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨
SPECIFICATION
Current Rating: 3.0Amp
Insulation Resistance: 1000MΩmin
Contact Resistance: 20MΩmax
Withstand Voltage: 1000V AC/DC
Contact Material: Brass
Contact Plating: Au or Sn Over Ni
Insulator Material: PBT or PA6T+30%GF UL94V-0
Operating Temperature: -40°C to +105°C
No side slot "A" and "B" from 6 to 16 pin
No side slot "A" from 18 to 58 pin
Number 2 No. of contacts: 40P, we also have 6, 8, 10, 12, 14, 16, 18, 20, 24, 26, 30, 34, 50, 60, 64P, when you place order on us, please inform us the exact contact number you want.
Number 3 contact plating: gold flash, semi-gold and semi-tin, tin available, when you place order on us, please inform us the exact contact plating way you want.
Number 4 insulator color: black, blue and gray available, when you place order on us, please tell us the exact insulator color you want.
Number 5 insulator material: PBT, PA6T, LCP, PA46, PA9T available, when you place order on us, please inform us the exact insulator material you want.
Number 6 packing: tray, bag, tube, tube + CAP, tape & reel, tape & reel + CAP available, when you place order on us, please inform us the exact packing way you want.
FAQ
Q: Do
you have QC department?
A: Yes,we
have 26 QC persons.
Q: What is the customer you
work with?
A: FLEXTRONICS,
FOXCONN, JABIL, TE, MOLEX, AMPHONEL, MIDEA, HITACHI, TCL.
Q:Do
you have a showroom?
A:Yes,
showroom with full range of products.
