Box Shrouded Header Introduction
Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides.
Classification of Box Header: Box Header are divided in o 1.27mm pitch Box Header, 2.0mm pitch Box Header and 2.54mm pitch Box Header according to PIN needle gauge. The diameter of the square row needles used will be changed accordingly according to the different pitch.According to the installation form, it can be divided in o straight needle Box Header, curved needle Box Header and SMT patch Box Header.
Function of Box Header: Box Header is welded on PCB board, connect IDC cable of corresponding specifications, and then form the circuit connection mode required by the designer with other circuits. Usually used to transmit control signals and weak currents.
Application of Box Header: The products are widely used in computer mainboard, liquid crystal display, telecommunication card, memory, mobile hard disk, card reader, digital camera, MP3, PDA, liquid crystal TV, switch, automobile anti-theft device, video phone, cordless phone and various communication equipment.
Connector Category: Box Header丨1.27mm(.050") Box Header丨 2.00mm(.079") Box Header丨 2.54mm(.100") Box Header
1.27*2.54mm 14P Shrouded Box Header DIP/THR 90° H=5.90 SPECIFICATION
Current Rating: 1.0Amp
Insulation Resistance: 1000MΩ min
Contact Resistance: 20MΩ max
Withstand Voltage: 500V AC/DC
Operating Temperature: -40°C to +105°C
Contact Material: Brass
Contact Plating: Au or Sn Over Ni
Insulator Material: PA6T+30%GF UL 94V-0
Number 2 No. of contacts: 14P, we also have 06, 08, 10, 16, 20, 26, 30, 34, 40, 50, 60, 80, 100P, when you place order on us, please inform us the exact contact number you want.
Number 3 contact plating: we have gold flash and tin plate, when you place order on us, please tell us the exact contact plating way you want.
Number 4 insulator color: black, blue and white, when you place order on us, please inform us the exact insulator color you want.
Number 5 insulator material: we have PA6T, LCP, PA46, PA9T, when you place order on us, please inform us the exact insulator material you want.
Number 6 packing way: we have tray, bag, tube, tube+ CAP, tape & reel, tape & reel + CAP packing, when you place order on us, please inform us the exact packing way you want.
Box header usually consists of a square plastic socket and a number of square needles arranged neatly. The difference between the simple box header and Ejector header is that the simple box header has removed the clips on both sides.
effect:
According to the requirements, the peripheral dimensions of the box header commonly include 1.27 spacing, 2.0 spacing and 2.54 spacing; According to the different spacing, the diameter of the square row of needles used will be changed accordingly. The contact surface between the bottom and the PCB board can be designed as SMT patch type or DIP straight plug 180 degrees.
After being welded on the PCB board, connect IDC flat cables of corresponding specifications, and then form the circuit connection mode required by the designer with other circuits. It is usually used to transmit control signals and weak currents.
