Box Shrouded Header Introduction
Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides.
Classification of Box Header: Box Header are divided in o 1.27mm pitch Box Header, 2.0mm pitch Box Header and 2.54mm pitch Box Header according to PIN needle gauge. The diameter of the square row needles used will be changed accordingly according to the different pitch.According to the installation form, it can be divided in o straight needle Box Header, curved needle Box Header and SMT patch Box Header.
Function of Box Header: Box Header is welded on PCB board, connect IDC cable of corresponding specifications, and then form the circuit connection mode required by the designer with other circuits. Usually used to transmit control signals and weak currents.
Application of Box Header: The products are widely used in computer mainboard, liquid crystal display, telecommunication card, memory, mobile hard disk, card reader, digital camera, MP3, PDA, liquid crystal TV, switch, automobile anti-theft device, video phone, cordless phone and various communication equipment.
Connector Category: Box Header丨1.27mm(.050") Box Header丨 2.00mm(.079") Box Header丨 2.54mm(.100") Box Header
1.27mm Box Header SMT type H=5.4mm
Length: 31.75mm
Width: 6.66mm
Height: 5.70mm
Number No. of contacts: 20P, we also have 1-19P, 21-100P, when you place order on us, please inform us the exact contacts number.
Number contact plating: gold flash and tin available.
Number insulator color: black, blue and white available.
Number 5 insulator material: PA6T, LCP, PA9T available.
Number 6 packing: tray, bag, tube, tube + CAP, tape & reel, tape & reel + CAP available.
Number 7 with locations pegs option: Type A without pegs and Type B with pegs available.
• The simple box header consists of square plastic socket and square needles arranged orderly. The difference
• between the connector and the simple box header is that the simple box header will remove the snapshot packets
• on both sides.
• • According to the requirements, the peripheral dimensions of small connectors usually have three specifications: 1.27 interval, 2.0 interval and 2.54 interval. The needle diameter of the quartet used according to the interval will also change accordingly. The contact between the bottom PCB board and the bottom PCB board can be designed as SMT patch or 180 degree DIP insertion.
• • Function: After welding to PCB, connect IDC flat cables of corresponding specifications, and then connect the
• circuit according to the requirements of other circuit configuration designers. Usually used to transmit control
• signals and weak currents.
• • The simple box header is just composed of a rectangular plastic socket and many neat pins. The box header extends two horns through both ends, similar to the two horns of a cow, so it is called the box header.
• • Application principle of box header: after welding to PCB, connect IDC flat cable of this specification, and then connect the circuit according to the requirements of other circuit configuration designers, which is usually used to transmit control signals and weak current.
• • Physical property 3360 Interval 1.27mm, 2.00mm, 2.54mm (optional): number of stitches 4P, 6P, 8P, 10P, 12P,
• 14P, 16P, 20P, 24P, 26P
• • The angle is embedded 180 degrees and bent 90 degrees.
Shipping way
FEDEX/DHL/UPS/TNT/Air/Sea/Land etc.
Payment term
T/T, Paypal etc.
