0 Piece,Product Price: US $ 0
Quantity(Piece/Pieces) | 1 ~ 1000000000 | >1000000000 |
Est. Time(days) | 15 | To be negotiated |
If you finish the payment today, your order will ship out within the delivery date.
Product Introduction
Product Category: Battery Holders丨Battery Mounts丨 Coin Cell Holders丨 Battery Contacts丨Battery Retainers丨Battery Clips 丨Battery Snaps丨SMD/SMT Coin Cell Battery Holders 丨Button Battery Holder Case Box Case
Coin Battery Holder・Coin Cell Holder・Button Cell Holder (CR498・ CR503・CR1058・CR1220・CR1225・CR1620・CR1632・CR2016・CR2032・CR2330 ・CR2430・CR2450・CR2477)
Button battery holder
Used to load button battery, generally soldered on PCB board, convenient for button battery powered module clock or other consumer electronic products.
Installation method
There are two installation methods for the button battery holder, one is the plug-in type, and the other is the patch type.
Coin Cell Holder for CR2032
DIP 90º CR2032 Coin Battery
Holder
DIP 90º CR2032 Coin Cell Holder
PA66 UL94V-0
Phosphor Bronze
Contact Resistance :
30 Milliohms Max
Insulation Resistance :
1000 Mega Ohms Min
Dielectric Voltage :
500V Ac One Sec Level
Operating Temperature :
-55°To 105°
1. Material:
a. Housing: PA66 UL94V-0
Contact: Phosphor Bronze
(Surface Plating: Sn=100u"~120u")
See Ordering Information
2. Electric:
a. Contact Resistiance: 30 Milliohms Max
b. Insulation Resistance: 1000 MEGA OHMS Min
c. Dielectric Voltage: 500V AC One Sea Level
d. Operating Temperature: -55°To 105°
Length: 26.8mm
Width: 22.7mm
Height: 10.1mm
Pin width: 1.4mm
Order code:
Number 2 apperance for the product: 180° type, we also have SMT and 90° types, when you place order on us, please inform us the exact apperance type you want.
Number 3 contact plating: tin plate, we also have gold flash, when you place order on us, please tell us the exact contact plating way you want.
Number 4 packing method: tape & reel packing, we also have tray packing, when you place order on us, please inform us the packing method you want.
Number 5 product number: CR2032J
Coin and button batteries (cells)
What are coin cell batteries used in?
Coin or button?
Everybody knows and uses small round batteries. Based on the shapes of these batteries we call them "coin" or "button" interchangeably, regardless of the chemicals inside. But there is an important difference between them: Coin batteries contain lithium, button batteries do not.
Coin batteries (or cells) contain lithium chemistry and have a 3 Volt output.
The sizes of popular types of coin batteries can be derived from their coding: CR 2025 (20*2,5 mm), CR 2032 (20*3,2 mm) or CR 2450 (24,5*5 mm).
If these batteries get stuck in a child's oesophagus then this leads to the most serious internal burns, which can result in chronic health problems or death unless there is immediate medical intervention.
Button batteries (or cells) do not contain lithium but for instance alkaline and have a 1,5 Volt output.
They are generally a bit smaller than coin batteries, for instance the popular LR44 alkaline battery is 11,6*5,4 mm. After these smaller batteries are ingested they travel through the gastrointestinal tract without causing significant problems in most cases. Only if they remain undetected in the oesophagus for a longer period, then the risks are comparable to that posed by lithium batteries especially for very young children. These children may also put small button batteries in ears or noses, damaging delicate tissues and causing serious injuries if undetected.
As we continue to use smaller gadgets, we need batteries that fit the devices. Coin cell and button cell batteries are hugely popular for use in equipment such as; calculators, car keys, remote controls, bank card readers, electronic games like Hexbugs, watches, Fitbit, digital scales and even digital thermometers. The list is endless! The benefits of lithium coin cell batteries are that they have a long life, along with a long shelf life. Their power to size ratio is huge.
Q: Are you trading company or manufacturer?
A: We are professional manufacturer specialized in connector and cables. And we export e our products with our clients directly.
Q: Can you do OEM and ODM?
A: Yes, OEM and ODM are both acceptable. The material, color, style can customize, the basic quantity we will advise after we discuss.
we can support ODM and OEM service here, we have strong R&D team in Antenk group.
Q: Can we use our own logo?
A: Yes, we can make your private logo with custom service according to your request.