RFI SHIELD CLIP MINI TIN SMD/EMI Gaskets, Sheets, Absorbers & Shielding EMC Shield Can Clip .15-.20MM Thick Cans Product specification
Product Category: Battery Holders丨Battery Mounts丨 Coin Cell Holders丨 Battery Contacts丨Battery Retainers丨Battery Clips 丨Battery Snaps丨SMD/SMT Coin Cell Battery Holders 丨Button Battery Holder Case Box Case
Coin Battery Holder・Coin Cell Holder・Button Cell Holder (CR498・ CR503・CR1058・CR1220・CR1225・CR1620・CR1632・CR2016・CR2032・CR2330 ・CR2430・CR2450・CR2477・CR2・CR123A)
丨18650 Battery Holder丨AA Battery Holder 丨AAA Battery Holder丨
|
Product Name
|
RFI Shield Clips
RFI SHIELD CLIP MINI TIN SMD
|
|
Category
|
|
|
|
RFI and EMI -
Contacts, Fingerstock and Gaskets
|
|
Mfr
|
|
|
Package
|
Tube/Tray/Tape &
Reel (TR)
|
|
|
Cut Tape (CT)
|
|
Type
|
|
|
Width
|
|
|
Length
|
|
|
Height
|
|
|
Material
|
|
|
Plating
|
|
|
Plating - Thickness
|
|
|
Attachment Method
|
|
|
Operating Temperature
|
|
|
Storage/Refrigeration
Temperature
|
-4°F ~ 185°F (-40°C ~
85°C)
|
|
Base Product Number
|
S0941
|
Material: Stainless Steel, T=0.15mm
Electroplating: Tin Plating 1.0 ~ 3.0um
0.4 ~ 1.5um Nickel Base
SOLDERING DATA:SOLDERING HEAT RESISTANCE=250°C±5°/10S
Battery spring piece belongs to metal stamping and is an important part of the battery. It is also known as battery connecting piece, charger terminal, battery connecting contact piece, battery spring piece, metal battery piece, battery buckle, etc.
The battery shrapnel is made of copper, iron, stainless steel and other materials. Electroplating CT, silver and nickel. When the battery elastic piece installed on the conductive film is pressed, the center point of the elastic piece contacts the PCB board to form a circuit, and the current passes through. It has the characteristics of strong conductivity and good hand feel.
Length: 3.9mm
Width: 1.1mm
Height: 1.2mm
EMC Shield Cans and Clips Introduction:
ATKCONN's shield can clips provide a straight-forward, easy-to-use board-level shielding solution
Image of Harwin's EMC/RFI Shield Can ClipsHarwin supplies a range of surface-mount shield can clips to provide a straight-forward, easy-to-use board-level shielding solution. The combination of SMT clips with a shield can provides a simple and cost-effective method of shielding vulnerable or EMI-radiating board components. ATKCONN's shield clips work with standard or custom can sizes from 0.13 mm to 1.00 mm thick.
With no secondary manual soldering operations, shield cans quickly and easily slot into the clips. This method avoids introducing hotspots from manual soldering, which could damage adjacent components. Rework or testing is now easy without a desoldering operation to access components under the can.
Features and Benefits
Solderless connection of can to PCB: no secondary soldering operation, no potential hotspots – cans are quickly hand-placed without soldering
SMT shield clips on tape and reel: enables fast and low-cost automatic assembly at the same time as the rest of the PCB
Fast removal of cans from PCB: no desoldering operation required for rework or testing
Eliminates the need for through hole cans which interrupt the grounding plane
Shipping way
FEDEX/DHL/UPS/TNT/Air/Sea/Land etc.
Payment term
T/T, Paypal etc.
