Buyers note:
If your place is remote ,then need to additional pay delivery fee .
Specification:
Model: CM-200S
Voltage: 220V
Frequency: 50 Hz
Power: 1500W
Temperature range: 0-400 ℃
Working voltage: AC220 ± 10V (can be customized 110V)
Working temperature: 0-55 degrees
Working humidity: <90% RH no condensation
Tin pot size: 200*150*45 mm
Product Size: 446*245*120 mm
Weight: 5.8KG
Performance characteristics:
1, Cm series lead-free solder furnace configuration of high-power heating core, can quickly dissolve lead-free tin, from room temperature to reach 450 ℃, only 25 minutes (depending on the size of tin furnace there will be slight differences).
2, using microcomputer chip intelligent control, dual digital display, intuitive and clear, high thermal sensitivity, warm quickly, temperature compensation fast.
3, lead-free solder pot made of imported titanium materials, high temperature, corrosion resistance, abrasion resistance, durable.
4, the tin furnace set the data directly with the touch button input, simple and accurate.
5, the data set by the machine can be long-term preservation, not by the shutdown, power outages.
Precautions
Tin melting furnace work must be placed in a stable, heat table work, to prevent high-temperature tin splashed from the tin. Has been melting tin and tin stoves overall temperature is higher, to be careful work, beware of burns.
When the tin stove is used for the first time, do not empty the tin pot to cause tin oxidation too fast. Please add small pieces of tin or partially tin to ensure the timely heat transfer.
Lead-free solder melting furnace must be placed separately from the tin furnace (including all lead
Do not use melting furnaces near combustible gases and flammable and explosive materials.
When moving the melting furnace, the power must be cut off before the furnace is cooled to room temperature.
This product is a high temperature equipment, do not remember to cut off the power when not in use, so as to avoid accidents.
In order to solder the safety and life of tin stove, tin stove does not work more than 12 hours.
In order to personal safety and the machine can work properly, remember not to be free to burn, use to be connected with the "ground" power supply, taking note that "ground" can not be connected to the "zero line".
The company melting tin stove with titanium TAI Japan imported refined materials, high temperature burning tin pot for a time after the surface will become golden brown or blue, which is normal, but also the material properties of this metal.
The quality assurance of this product is that all the parts are under the original accessories of the brand, otherwise the quality will not be guaranteed.
Customers in use, boiled acid, alkali, dross and other strong corrosive materials, tin pot and heating body will not be guaranteed.
The tin stove is not waterproof, pay attention to moisture in use.
Fault detection：
1, the boot is not powered, check the fuse is open, or plug is plugged.
2, boot the same temperature display, does not heat up, said the heating element disconnected.
3, after boot if the left display shows the temperature is high, the right display shows HIA or ORA and has blinking, it shows that the thermocouple is open, or temperature control table failure.
