----------------------------------------------------------------------------EASY DIY LIFE ,TOP PDR BRAND--------------------------------------------------------------------------
Super PDR Tools Small White Glue Gun 20W US Plug Pistolet a colle Hot Melt Glue Guns Heat Temperature Tool Guns Thermo Gluegun
Description
--- Small and practical, very suitable for home use. The glue can be melted by inserting the strip from the tail of the glue gun for 3 minutes, and the melt can be extruded by tapping the trigger.
--- This glue gun uses high-tech ceramic PTC.
--- High-quality heating elements, fast heating and long service life.
--- Unlimited by voltage fluctuations, it can be used normally between 100V-240V.
--- Safe design to prevent overheating, built-in safety fuse.
--- Insulation electrical strength 3750/min, no breakdown.
Precautions:
1. This gun is a high temperature glue gun, using a strip with a diameter of 6.8 ~ 7.5 mm.
2. The glue gun nozzle and the melted glue have a higher temperature during work, and the human body must not touch
3. Because the glue gun is a high temperature PTC heating element, if it is not used for a long time, please cut off the power supply to prevent the rubber strip from melting backwards to d amaged glue gun.
4. This tool must be placed on its stand when not in use.
Specifications
1. Size : as following photos
2. Color : White
【Instructions】:
1. First insert the glue stick from the rear end of the glue gun into the gun body, then plug the glue gun into the power supply, and pass the electric heating piece inside the gun body.
2. Heat for three minutes (don't worry, preheat it and use it again, otherwise press the trigger hard, the glue stick without melting will block
3. Hold the gun) and pull the gun button to fill the gel stick and melt it. Then the hot melt glue will flow out from the muzzle to start to stick or fill.
【Precautions】:
1. The adhesive surface of the rubber surface ensures no water, no dust and no oil. The hot melt glue of the glue is mainly filled and bonded.
2. 502 super glue characteristics will not corrode and will not burn the bonded material, and it can be used in the proper place to achieve optimal effect.
3. If the glue gun is used, it is not necessary to pull out the unused glue stick, and keep it energized for the next time.
Note: When the glue gun is not in use, be sure to turn off the power. Do not let the glue gun not use the power for more than five minutes! Otherwise it will overheat and burn. The glue gun head should face down to prevent the glue from flowing backwards, causing damage to the glue gun.
Package
1 * Small White Hot Melt Glue Gun (US Plug )
Details
