Quantity(Piece/Pieces) | 1 ~ 1000 | >1000 |
Est. Time(days) | 7 | To be negotiated |
If you finish the payment today, your order will ship out within the delivery date.
GORDAK 968 hot air gun desoldering station two in one digital display desoldering station 936 electric ferrochrome hot air table
Rated voltage: AC 220V 50HZ Heat gun part Maximum power consumption: 450W Air pump type: brushless fan soft wind Temperature range 100 degrees Celsius - 500 degrees Celsius Air flow: 120L/min (maximum) Handle assembly length: 120CM Noise: <45db Soldering iron part Output voltage: AC 24V Maximum power consumption: 50W Temperature control range of 200 degrees Celsius - 480 degrees Celsius Ground potential: 2mV. (less than) Grounding impedance: 2m ohms (less than) Heating element: ceramic heating element Heating body power: about 50W Features: Temperature LED digital display, long life. Integrated heat gun and soldering iron. The brushless fan has a very long life, very low noise, and a gentle wind to protect the chip! In addition, the system has an automatic cold air function, which automatically enters the energy-saving state when cooled to 100 °C! (Standby mode: the air gun port is up, you can cool down to 100 °C, then enter the energy-saving state) Advantage: 1.The sensor is closed loop, the microcomputer cross-zero triggers temperature control, the power is large, the temperature rises rapidly, the temperature is stable, and it is not affected by the wind; 2.the air flow is adjustable, the air volume is large and the air is soft, the temperature adjustment is convenient, and it can adapt to various uses; 3.the system has an automatic cold air function, which can extend the life of the heating element and protect the heat gun; 4.the body is small, durable and beautiful; 5.the original imported brushless fan has a very long life, very low noise, using high-quality heaters, the efficiency can be doubled under the same power, effectively extending the working life of the heater and saving power; 6.suitable for most surface mount parts desoldering, can safely desolder QFP, PLCC, SOP, BGA and other temperature sensitive