Explosion-proof pressure transmitter constant pressure water supply diffusion silicon pressure sensor 4-20mA output
Housing material: 304 all stainless steel joints High strength cast aluminum shell
Connector size: M20 × 1.5 (can be customized)
Measuring range: -0.1-0-100MPa (optional in range)
Accuracy level: 0.5, can be customized to 0.2
Core: imported diffused silicon chip
Voltage:12-24V DC
Current output: 4-20mA
Technical Parameters
Current output: 4-20mA (can be customized 0-5V 0-10V)
Pressure type: gauge pressure (default), absolute pressure, sealing pressure
Power supply: 12~24VDC (default)
Accuracy level: 0.5% FS default 0.2% FS 0.1% FS
Protection level: IP65
Response time: 2ms
Media compatible: various fluid media compatible with 316L stainless steel
Installation thread: M20x1.5 (other specifications can be customized)
Shell material: 304 stainless steel
Core: imported diffused silicon chip
Compensation temperature: -10~70°C
Working temperature: -20-80 °C
Zero temperature drift: 0.5% FS (MAX)
Sensitivity temperature drift: 0.5% FS (MAX)
Pressure overload: 2 times below 10MPa; 1.5 times above 25MPa
Mechanical vibration: 20G (20-5000HZ)
Sampling time: 2400 times per second
Long-term stability: ≤0.2%FS/year
Installation matters
(1) Choose a place that is easy to operate and maintain for installation;
(2) It should be installed as far as possible from the vibration source;
(3) It should be installed as far as possible from the heat source;
(4) Install directly on the pipeline or equipment, and clamp it to the six sides of the transmitter with the wrench.
Notes
(1) Care should be taken when handling and installing the transmitter to avoid collision and affect the performance of the circuit.
(2) There is an isolation diaphragm in the pressure inlet of the transmitter. Do not touch it with foreign objects.
(3) The external thread of the transmitter must pay attention to the seal, otherwise the pressure will not be unstable.
(4) The safety barrier shall obtain an explosion-proof certificate, and its installation shall be carried out in accordance with the requirements of its instructions.
(5) If you encounter problems during the installation and use of the product, please contact our company. If there is any abnormality in the product, please do not open it for repair. Please contact the manufacturer in time.
