Please note:
PH-803W, APP software can scan this QR code to download, the QR code download password is: 778856, currently only supports Android system download and use, temporarily does not support Apple terminal, if you need APP software installation video, please contact me, Provide your email, I will send you APP software and APP software installation video to help you install, link to the phone and use the product.
Funtion
This 2-in-1 WIFI pH & ORP controller and monitor simultaneously measures and displays both pH value and redox value (ORP). It comes with 2 BNC electrodes (pH and redox) and 2 output power sockets. Both electrodes are detachable, they can be replaced easily at any time. As for the relay output power sockets, you can plug in your own 110V/ 220V device to it, e.g. air outlet stone, O3 ozoniser, oxygen pump, CO2-regulator, electromagnetic valve and other ORP & pH control devices. Simply set the desired Hi/ Low pH/redox values in the controller. It will turn on your device if the currently measured pH or Redox value is lower than your set value, and it will turn off your device if the measured value is higher than your set value.
Operation and Clibration:
Calibration steps:
pH calibration:
In pH6.86 Calibration solution
1.Connecting AC power supply. Immerse the ph electrode in a pH6.86 buffer solution, and gently shake it until the reading to stabilize.
2.Long press [b] ,until the indicator light of “pH” flashes.PH6.86 is shown in the first line.
3.（1）Short press [a] to exit the current mode if the calibration of ph6.86 is not performed.Then the device returns to measurement mode.
（2）Short press [c] to complete the calibration of pH 6.86 when the reading of the second line is stable if the calibration of ph6.86 is performed.Then the device automatically returns to measurement mode.
4.The calibration of pH6.86 is completed.
In pH4.00 Calibration solution
1.Connecting AC power supply.Immerse the ph electrode in a pH 4.00 buffer solution, and gently shake it until the reading to stabilize.
2.Long press [e],until the indicator light of “pH” flashes.pH 4.00 is shown in the first line.
3.（1）Short press [a] to exit the current mode if the calibration of pH 4.00 is not performed.Then the device returns to measurement mode.
（2）Short press [c] to complete the calibration of pH 4.00 when the reading of the second line is stable if the calibration of ph4.00 is performed.Then the device automatically returns to measurement mode.
4.The calibration of pH 4.00 is completed.
ORP calibration:
This meter has been accurately precalibrated for mV range at the factory. and there is no need for users to calibrate.
Connecting device:
Ensure the device and phone connect the same WIFI.
Register and log in.
In the interface of My Device,click “…” in the upper right corner,and click Add Device.
Enter the WiFi ID and the password.Then click Next.
Enter the interface of module type selection.Click ESP.
Long press [a] of the ph-803W until the WiFi signal flashes.Check "Steps have been completed" and click Next.
After reaching 100%,you can check the device successfully connected to the Internet in the interface of My devices.Clicking the device,you can view the reading of pH and ORP as well as the on-off condition of the power control box.
After the device is connected to the Internet, click "... "in the upper right corner. , you can rename the device in the interface of Settings Device Information.You can check the readings of your bound device anywhere through the phone.
Attention:
Calibrating again after long time break
Keep the water not over the probe.
Application:
This device is suitable for aquarium,hydroponics planting,fish farming and tank and pool.
Packing List:
1 x Dual Aquarium Controller for pH & ORP (Available in 110V or 220V)
1 x Detachable 300cm pH electrode
1 x Detachable 300cm ORP electrode
2 x Rubber cable holder with suction cap
1 x Metal wall hanger
1 x Mini-screwdriver
1 x English Operation Manual
Q:why would you buy this item？
A: Instantly display pH value and redox value (ORP) all at the same time on its LCD screen
Equipped with 2 probes (pH and redox), and 2 power sockets
Simultaneously control other pH & ORP related devices to regulate the pH and redox values in liquids
Accurately, easily and systematically MONITORS and CONTROLS pH and ORP values as well as the other pH and ORP related control devices all in one single unit
Features fast response and easy to calibrate REPLACEABLE pH & ORP Electrodes, no need to buy and replace the whole unit
APPROVED BY STRICT QUALITY AND SAFETY STANDARDS ensures a reliability, stability, long and trouble-free life and can be transported easily
Uses the Protection Dead Band feature
Gives you an option to mount it on the wall or hang on the solution's container while using or installing the unit
Available in 110V and 220V
Q:It Need to calibrate before use?
A: No need already calibrate before ship
Q:Does it take with battery?
Multiple Colors Available
110v
220v
Yieryi
YIERYI brand was registered in 2016. The main products are refractometers, PH meters, tds, ec pens, soil meters, kitchen scales, and jewelry scales. In order to ensure the accuracy of the data, we gave up the low-cost chip, selected high-precision Taiwan imported and South Korea imported chips, the design chose a portable pen-type design, light, beautiful, and easy to carry. All products will be tested, calibrated and used by ourselves to ensure that the quality is qualified and then promoted. We want to let this healthy brand enter every family and every corner of the world, and pass on the dream of "world love, China made"!
