Adblue emulator euro 6 for Volvo for Scan for Man Adblue emulator with NOx Emulator for Euro 6 Truck to Disable AdBlue system

Euro6 Adblue Emulator for Volvo

Highlights:

1. Avoid all of adblue system errors
2. Do not need adblue fuel
3. Do not get and adblue or NOx fault
4. Prevent torque loss

Importance of forVolvo Euro6 Adblue Emulator:
Trucks generally give adblue or nox system errors so work hard. Your truck can cause loss so some adblue errors or fault lights.
These problems cause you money and time. After installing adblue remove emulator, you dont get other adblue errors and you do not need to add adblue fuel. After the installation, your adblue fuel level will be up automatically.

Adblue Remove emulator disable these systems:
AdxBlue system (All)
AdxBlue NOX sensor
DPF system
DPF temperature sensors

DPF regeneration Supported Models:
Euro 6 forVolvo FMX Series
Euro 6 forVolvo FH Series
Euro 6 forVolvo FM Series

Installation emulator for VOLVO Euro 6

1.Find wire number 7004(CAN High)and 7006（CAN Low)located on the front of car,Like on the photo.

2.Connect wires from the emulator as follows:

YELLOW wire from emulator -->7004(CAN High)
GREEN wire from emulator -->7006（CAN Low)

3.On the right side of the frame,locate the plug visiblity on the photo.

4.Connect wires from the emulator (two long wirds in a black isolation)as follows:

WHITE wire from emulator --> GREY wire to pin nr 34 (CAN High)
BROWN wire from emulator --> ORANGE wire to pin nr 34 (CAN low)

5. You should connect the power supply (single wires) to the unit.

   BROWN wire from emulator  --Ground

   WHITE  wire from emulator _ +24V(after the ingition)

6. You should disconnect plug from the pump and remove DPF

   If car have any errors, remove them from ECU

Package List:

1pc x forVolvo euro6 adblue emulator

for Scania Euro6 Adblue Emulator

Adblueobd2 Emulator for MAN Euro6