Precautions for use:
Please do not go against the wind. When using, do not use against the wind or blow by the fan. It is easy to cause the nozzle to reverse the fire. Double-switch model. Use slightly turn on the upper switch, small airflow ignition, after ignition, the upper switch does not move, use the lower switch to adjust the flame size
It is recommended to use a gas tank below 1 meter. It is recommended to use a gas tank below 1 meter to avoid excessive pressure to open the pipe, or difficult to ignite/easy to extinguish
1. After ignition, do not open the switch completely. The switch has a reserved silk path. If the gas pressure is too high, the gas flow will exceed the oxygen supply limit when the switch is fully opened, and the flame will be easily extinguished.
2 Turn off the gas switch after use, then increase the firepower to burn the gas in the gas pipe cleanly, and then turn off the torch switch to prevent the remaining gas from causing safety hazards.
Electronic ignition uses electronic impact ignition without battery life longer
Single switch has only one switch to control the flame size, double switch can be controlled by two switches, more gas-saving, safe and reliable
Stepless variable pressure, easy to adjust the size of the flame, can choose the appropriate type of torch according to the specific application, and work more energy-saving and efficient
Squeeze pressure and release pressure
Counterclockwise pressure and clockwise decompression
Instructions for use of torch
1. Check
Connect all parts of the spray gun, tighten the gas pipe clamp (or use a wire to tighten), connect the liquefied gas bottle, turn off the torch switch, loosen the valve of the liquefied gas bottle], and check whether the parts are leaking.
2. Ignition
Slightly loosen the spray gun switch and ignite directly at the nozzle. Adjust the spray gun switch to reach the desired temperature
3. Close
First, close the valve of the liquefied gas cylinder. After the flame is turned off, turn off the switch. There should be no residual gas in the pipe. Hang the flame jet with the gas pipe and place it in a dry place.
Precautions
1. This product is strictly prohibited from oil and corrosive gases and liquids.
2. It is strictly forbidden to ignite with large air current.
3. The air supply hose must not be burned or aged.
4. Do not use inferior gas.
5. All connection parts should be checked frequently to keep airtight.
6. When you stop using it, it should be hung in a dry place
About Payment
1.Orders processed timely after the payment verification.
2. Full payment must be made within 7 days after placing your order, or the order will be invalid or canceled by the system.
3. Make sure that you have completed all the detailed information like contact person,address,post code and telephone number when filling in your buyer's information.
Contact Us
1.If you have any questions or need any help, please feel free to contact us! Thank you !
2.We do try respond as quickly as possible.but please allow delay response for non-business time. we will be glad to answer any question you may have so please feel free to contact me.
About Feedback
1.Buyer's early confirmation will be highly appreciated after receiving the items.
2.Since your feedback is very important to our business's development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. It'll just take you 1 minute,but this 1 minute has the extremely vital significance to us.
3.Please contact us before leaving any negative or neutral feedback. We will work with you to solve any problems.
