Features:
- The heating body of metal ceramics is adopted, which can increase the temperature rapidly and has a long life.
- Powered by 3.7V rechargeable lithium-ion battery (built-in), charge once, it can be used for 100 minutes.
- External USB charging interface, easy to charge and operate.
- Wide applications: toy models, artificial flowers, ornaments, wood products, electronic circuit board.
Parameter:
Charging voltage: DC 3.7V
Working voltage: 12V
Power: 5 - 12W
USB cable length: about 60cm
Operation Instructions:
1. Insert a diameter of 7 - 7.5mm glue stick into the gun hose from the rear.
2. Power on and pre-heat 2 - 3 minutes.
3. Pull the trigger and squeeze melt adhesive out.
Cautions:
- Please do not pull out the left stick at the end of use, it may damage the glue tool severely, you can use the left stick directly next time.
- Use the glue tool before charging, when the lamp turns green, it is full.
- The glue tool should be placed at a stand when not working.
- Keep it out of the reach of children.
- Please place the tool in a dry and ventilated position. Please do not place it at a humidor watery position.
- Please power off if no adhesive flows within 15 minutes, avoiding any inverse adhesive flow damages.
- It is normal to see some smoke at the first use, it will disappear after 30 minutes.
- Always keep the rear slide block clean, ensure any insert of a stick into the heating hose is smooth.
- The temperature of a hose and melt adhesive is high when working, any direct body touch is prohibited, and do not use it at any flammable or explosive circumstances.
0.200
Package weight: 0.234 kg
Package Size(L x W x H): 19.00 x 22.00 x 4.00 cm / 7.48 x 8.66 x 1.57 inches
Package Contents: 1 x Glue Gun, 1 x Glue Stick, 1 x USB Cable
