NEWACALOX 20W EU/US Mini Hot Melt Glue Gun DIY Thermo Electric Silicone Adhesive Gun Heat Temperature Tool 20pc 7mm Glue Stick
Feature:
1.Handy and lightweight, comfortable to hold in hand.Independent power switch,easy operation, enhanced fan-shaped trigger,two finger trigger, moves up and down in an arc.
2.Comes with metal stand ,high-quality aluminum nozzles,Anti-hot protective cover to protect children hand work.
3.Made from resisting high temperature engineering plastics,the device built-in ring, to prevent the glue bar back flow control,the insulates heater body installment ,It is work longer life.
4.Use high quality PTC heater core, heating fast(3-5mins) ,save time ,automatic of control temperature.,save enger,working in 100V to 240V electrical,inside place the fuse,use more safe.
5. Hot melt glue sticks, strong adhesive,easy cleaning,Wide application in DIY handcraft and repair job.
Specifications:
• Color: Blue /White /Red
• Power: 20W
• Thermostat Operating Temperature: 140° ~ 240°
• Working Voltage: 100 V-240V
• Frequency: 50-60 Hz.
• Nozzle Material: Aluminum
• Indicator: LED
• Plug Type: EU plug(220V)/US plug(110V)
• Glue Sticks Size: 6.8-7.8 mm
• Cable Length: 136 cm / 4.46 ft.
Pakcage Include:
1 pcs mini glue gun
20 pcs glue stick or 1pcs glue stick
1 pcs english manual
1. Switch
2. Spring
3. High Temperature fluorine rubber, long working time in 250℃（482℉）
4. Seal ring,six rings to make sure zero leakage inside
5. PTC ceramatic heating core
6. Heating nozzle, Leak-proof design
7. Trigger
1. Rubber protective case
2. Glue entrance
3. 7 mm glue stick
4. Indicator light
5. Power switch
6. Power wire Protective
7. High quality VDE Standard Pure Copper Power Wires.
8. Glue gun stand
About Glue Leakage
when you stop working. the glue gun will have few Glue Leakage. This is the right situation.
this is NOT a Quality Problem.
How the glue gun to prevent Leakage?
when you push the trigger. the glue will push the steel ball and make the glue flow out.when you stop working. the steel ball will spring back to stop the glue flow out.
Why my glue gun have glue leakage?
There are two reasons cause the glue leakage.
1. when you stop working. the red area still have some glue inside. they will flow out.
that's why when you power off the switch. there is still have some glue flow out.
2.when you finish your work and you did not turn off the switch. the glue stick will keep melting.
and the heating room's pressure will increases. the pressure will push the steel ball into s small gap.
so the glue will flow out from the gap.
1. Switch
2. Spring
3. High Temperature fluorine rubber, long working time in 250℃（482℉）
4. Seal ring,six rings to make sure zero leakage inside
5. PTC ceramatic heating core
6. Heating nozzle, Leak-proof design
7. Trigger
