Quantity(Piece/Pieces) | 1 ~ 1000 | >1000 |
Est. Time(days) | 7 | To be negotiated |
If you finish the payment today, your order will ship out within the delivery date.
Features:
This kind of screws are suitable for most of tires and add off-road capacity to your ordinary car, truck, motorcycles,etc. It brings a good anti-slip property for your tires.
Made of hard metal, these kind of tire stud screws are strong and durable in use.
It has a low ground pressure and it is environmentally with minimum impact.
It is easy to install with certain drill and can match well with your vehicle tires.
Please choose appropriate size of new studs in the installation process in terms of the depth of tire thread.
This type screw tire studs can be easily installed and removed without professional tools. When it's not in winter, it can also be disassembled from the tire. And you can store these screw tire studs for using again in th following season.
Specification:
1. Pin of studs: 100% tungsten carbide (WC-80%+Co-10%, Hardbess :>90 HRA or >1300HV TRS Mpa:(N/MM2):1660)
2. Body of studs:carbon steel
3. Surface of studs: Galvanizing
Color: Silver
Length: 25mm
Head Diameter: 6mm
Tip diameter:2.8mm
Item Quantity: 100 pcs/bag
Please pay attation:
It's important for choosing right size of studs, you must to know the depth on pattern of tread rubber to your tire. The depth must longer than 25mm.
It is easy to install, but professional installation is highly recommended.
Installation:
Drill (using a very small bit) down from the center of chosen knob into the tire.
Drill a screw up from inside to out. If the angle isn't perpendicular to the tire, it will stick out one side or the other. Do one hole and screw at a time.
Put duct tape over the screws on the inside of the tire. Sometimes it is best to use two layers of tape.
Package Contents:
100 x Tire Stud Screws(Without tool)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.