Soldering wick wire 1.5mm 2mm 2.5mm 3mm 3.5mm Desoldering Braid Welding Solder Remover Wick Wire Lead Cord Flux BGA Repair Tool

Solder Wick Specification Option :

Optional 1: CP-1515 -- 1.5mm Width, 1.5M Lenght
Optional 2: CP-2015 -- 2.0mm Width, 1.5M Lenght
Optional 3: CP-2515 -- 2.5mm Width, 1.5M Lenght
Optional 4: CP-3015 -- 3.0mm Width, 1.5M Lenght
Optional 5: CP-3515 -- 3.5mm Width, 1.5M Lenght

WARNING:

Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.
To avoid fire, never use a soldering iron and desoldering wick around combustibles or in an explosive environment.

Usage Method:

1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
2. Remove the desoldering wick after the solder has been absorbed.
3. Cut off the used section of the wick using nippers.
4. Repeat steps 1,2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63% and 60% (tin content) have good absorbability.