Car Alarm auto Engine Push Button Starline Start Stop RFID Lock Keyless Entry System Remote Central Lock Anti-theft System
Notice:
1. It is for 12v only which is middle-class or low class vehicles, and do not work for high-class cars.
2. If your car has chip immobilizer, you need to buy bypass or use other way to avoid chip immobilizer
Before installing one start engine, please install additional open relay (above 40A ) on Host ON2 if your car has HID lamp.
Features:
- Push button engine start.
- Emergency lifting function.
- Telecontrol starting function, the oil pump detection function.
- Remote start 6 seconds preheating in advance function.
- Automatically lock the host after stalling 35 seconds.
- 10 minutes timing flameout function after telecontrol starting.
- Telecontrol starting safe handbrake detection function.
- Automatic locking the door function after telecontrol starting.
- Open acoustics and dashboard function.
- Can be matched your car alarm system or keyless entry system.
- Can be used in all kind of cars.
- Easy to install and to detach.
Features: Durable,Portable
Functions: Improve driving safety
Material: ABS,Electronic Components,Metal
Q&A :
1.How to find the ACC wire?
Please rearrange the 6P cable, after you twist the key to the first gear position (you can listen to music at this time), measure the line that has electricity on your original car is the ACC line.
2. For your 6p cable, but my original car is only 5p. what can i do ?
If your original car is a 5P line, the right connection is normally 1 power line, 1 ACC line, 2 ON lines, and 1 start line. If you didn't follow this step, it means you got wrong installation. pls recheck it again. and pls remember 2 ON lines need to distinguish which is ON1 line and which is ON2 line. If the two ON lines are always charged at the time of startup, you need to connect the two ON lines in parallel.
3. How to tell the wire ON1 and ON2?
If you test these two ON lines at startup, one of the two that always has power is the ON1 line. And If the other one has instant power is the ON2 wire.
Package Contents:
1 x Car Engine Push Starter Host,
1 x Push Start Stop Button (1m Cable Length),
2 x Wire (0.6m / 1m),
1 x English User Manual
