10~100m 3/4" Φ20mm Thin-Soft Spray Tape Agriculture Irrigation Hose Farm Irrigation System Water Tape Garden Lawn Watering Hose

10~100m 3/4" Φ20mm Thin-Soft Spray Tape Agriculture Irrigation Hose Farm Irrigation System Water Tape Garden Lawn Watering Hose

If you need a largr order. Please feel free to contact us, we will give you a good price. Thanks

Details:

Origin: China Product Name: 3/4" Watering Tape Color: Black Effective Working Length: 15~20m Spraying Range: 1~2m Material: PE Thickness: 0.21mm Working Pressure: 0.1MPa Weight: A whole roll, length 200m, about 2.2kg. (other length, we'll cut for you)

Use note

1. The drip irrigation tape must be used at an ambient temperature greater than 0 ° C. 2. The irrigation water must be filtered by a filter with a filtering accuracy of 120 mesh or more. 3. When carrying out irrigation operation, it is necessary to slowly open the main water transmission switch and gradually reach the rated working pressure to avoid the damage to the drip irrigation system caused by the instantaneous high pressure caused by suddenly opening the valve. 4. When cutting the irrigation water tape, it should be cut vertically, and the shear position should be between the two flow channels. 5. The drip irrigation tape is used on the ground. Do not bury it underground. 6. The holes must be upward when using the drip irrigation tape. 7. The drip irrigation tape shall be laid flat and straight, and shall not be folded or twisted. 8. Prevent sand, soil and other sundries from entering the irrigation water tape. 9. When using the common tee, the size of the outlet hole shall be adjusted or the valve tee shall be used to ensure the uniform water output of each drip irrigation tape. 10. The main pipe shall not be directly connected to the high-pressure water pump, and the thick skin pipe shall be used for transition in the middle, and the length shall be more than 10 meters. 11. If the water quality is poor, please wrap the filter screen at the water inlet of the water pump or use the filter. 12. The fertilizer should be melted in advance to ensure that there is no granular material. 13. Crop planting ground shall be kept flat as far as possible to avoid too large height difference. 14. Mechanical or artificial damage is strictly prohibited during transportation and laying.