WiiYii New M10 HUD OBD2 head up display Windshield Projector overSpeed Security Alarm Water temparature RPM With Lens Hood

M10 HUD head up display

HUD short for Head Up Display.It displays driving datas on the front windshield such as speed,RPM,water temperature,voltage,single mileage etc on the car front window glass;avoiding drivers unsafety because of watching the instrument while driving.Drivers can read the driving information instantly , and can always keep the best state on the way with HUD.

Specification:

Brand Name: GEYIREN Name: Head Up Display Material: PC/ABS Display unit: vehicle speed, clock, battery voltage, RPM water temperature, etc. Alarm: overspeed, engine failure, water temperature, voltage, etc. Installation location: center console Connection: Connect to the OBD2 port of the vehicle Compatible: Available for cars with OBD2 (after 2007 years) (owners of Zhonghua, Peugeot, Ford and Mondeo ,Please do not place an order)

Package List:

1X HUD 1X OBD Cable (1.8m) 1X Non-slip Mat 1XReflective film 1X Manuel

FAQs (Solution for Common Problems):

1.The screen without any display,and no electricity Start the car engine;check if the OBD cable line is tight;please pull down the OBD cable several times to confirm;check if HUD power switch turns on. If no display still,please test the device on a different car, analyze whether the car OBD diagnostic interface is good, if it is not good,please repair it and try again. 2.When HUD power on, HUD only shows the car voltage and be automatic power off after 30 seconds driving. HUD is only suitable for cars with OBD2 agreement and EU-OBD agreement（Other region:after 07 years） HUD Products donnot support JOBD and OBDI and recommended test for another car. 3.Inaccurate Speed a.First check the speed unit is correct or not, the speed unit can switch into KM/H and MPH, short press in the wave button to switch between KM/H and MPH b.When HUD is power on,vertical press the setting button for 5 seconds to enter into the menu options, find Speed Adjustment,up or down the setting button to increase or decrease the value according to the difference until it shows correct one.After adjustment, vertical press in 5 seconds to save it. 4.Wrong operation lead to crashes. Or inaccurate datas Do a reset setting.