Special note: 

OLED soldering station on a new heater installed being given issue beeps, it does not

matter ,two or three minutes will be ok, like a new heater will have a process of adaptation,

If you use the aged or used T12 Tips ,will not have the error and beeps,new heater  temperature

is within 5 degrees of beating is normal. After beating aging will be within 1 degree.

The controller Words with Full English Display ,5 seconds fast tin, excellent workmanship, quality and stability, strong power, freely adjust the sleep time to 30 minutes, black brushed aluminum casing, black acrylic panels, beautiful appearance, large joints is no longer a problem

Working AC voltage: 100-240V

Temperature setting range: 150-480 degree, the actual temperature can be 500 degrees

Sleep Time 1-30 minutes freely adjust

Built-in power supply: 24V 3A, 108w.

SIZE:88MM * 38MM * 138MM

Basic operation

1: Normal mode, the rotary encoder to adjust the temperature, slow turn, every 1 degree

     grid, fast forward 5 degrees per division.

2: Under normal mode,short-press the encoder to enter dormancy, any encoder operation

    quit ,if the vibration mode is enabled, then the vibration handle to exit Hibernation.

3: Normal mode, double-click on the encoder to enter the enhanced mode, any action the

    encoder exits.

4: In sleep mode, press the Mid-button off, power on again or press the power button.

5: Normal mode, press the encoder to enter the menu setting mode.

6: A long time without entering sleep mode, if not longer into shutdown mode, the two

    times can be set to enter the menu.