Electric tassel machine Automatic paper machine cutter Flower type paper manual paper cutter Paper craft accessories processing

Product showing:

Parameters:

[Technical Parameters]

Cutting speed: 300 times / minute

Cutting depth: 2mm~22mm

Paper strip thickness: 60g~120g

Paper strip width: 5mm~25mm

Fringe thickness: 0.3mm~3mm

Voltage: 220V - 50Hz

Strip length: no limit

Weight: 900g

Cutter: can be exchanged, the theoretical time is 300 hours

☆ [Working principle]

The tassel machine uses a mechanical paper cutting device of the motor and synchronously drives the movement of the paper to realize automatic continuous cutting. The tassel strips cut out by the tassel machine are very uniform, and the thickness of the tassels and the depth of cut are adjustable, which can greatly improve the efficiency of manual paper cutting.

☆ [Usage method]

1. Turn on the power;

2. Lift the paper feed roller pressure bar, put the paper strip between the pressure bar and the lower roller, and fix the paper strip between the inner wall and the magnet with a fixed paper strip magnet;

3. Turn on the power switch, and the tassel machine will start working. Observe whether the cut tassel meets the requirements. If it does not meet the requirements, turn off the power switch, adjust the relevant knob, adjust the adjustment, continue to open the power switch to let the tassel machine work, repeat the above steps. Until you are satisfied.

☆[Precautions]

1, It is strictly forbidden to touch the mechanical movement part by hand during the working of the machine to avoid danger;

2, pay attention to prevent falling from a height;

3, pay attention to electricity safety, can not immerse the machine in water or work in a humid environment for a long time, so as not to damage the motor;

4, to avoid motor work for a long time, it is recommended that a single continuous working time should not exceed 2 hours, so as not to damage the motor;

5, Do not disassemble or repair the product privately;

6, to avoid the sun to shoot, prevent external plastic parts from premature and old goods;

7, Children under the age of 14 must be used under the guidance of an adult.