Hot Selling Bicycle Wall Metal Bracket Hook Road Mountain Bike Wall Hanging Bicycle Rack Holder

Features:
1. Space Saving: Put your bike in the garage more easily and save home space. In terms of floor space,This is by far the most economical bicycle storage solutions.
2. Easy to Use: It is very convenient to place the bicycle, no other complicated steps are needed, which saves you time.
3. Allow bicycles to be placed on other bicycles. It fixes your bike at a 25 degree angle so that the bikes can be stacked together. In this way, you can install up to three bicycles on a 2.5-meter-high standard wall.
4. Its seamless, smooth and simple design is perfect for homes or garages. Its smart design does not require contact with the frame, thereby reducing the risk of scratches.
5. Wide Application: The design of the hook makes it suitable for all types of pedals, whether you are a road bike, mountain bike or even an electric bicycle, which means that the bicycle can be hung easily. The axle of the pedal should not exceed 20mm so that it fits perfectly in the recess of the hook. This is the case with most pedals.

Notice:
1. Actual color may be slightly different from the image due to different monitor and light effect. Please allow 1-3cm deviation due to manual measurement.

2. This wall holder must be installed on a solid brick wall or concrete!

Specification:
Single piece thickness: 2.53mm
Package dimensions: 170*90*75MM
Include: 1 pedal support; 2 tire supports; several expansion screws
Material: ST37 high carbon steel, bearing 30kg, if the wall is strong enough(also suitable for electric bicycles)

INSTALLATION STEPS:
1. Mark the mounting holes on the wall
2. Use M6 drill bit to make a hole, about 32mm deep, and clean it up
3. Insert the expansion screws
4. Tighten the screws and check if they are firm
5. Find the installation location for the trailer
6. Repeat steps 1-4
7. Installation is complete