Power Supply Timer Controller Board with 6 kind Coin Acceptor for Arcade Vending Machine with 40cm White Lead,JY-15B

Package include:

*1 X timer contrlo board with display;

*1 X coin acceptor.

• Timer Control Board with coin acceptor(6 kind coins)
• Identify accuracy rate 95%
  Identity speed 0.6 second
  Power source DC12plusmn10%
  Working current 50ma
  Moment maximum current 350ma（less than 0.5S）
  Net weight g
  Operating temperature -10-60℃
  Storing temperature -20-85℃
  Operating humidity le95%
  barometric pressure 85Kpa-106Kpa
  Applying coin diameter 15mm-29mm
  Applying coin thickness 1.8mm-3.0mm
  canning material PC plastic
• Input Voltage:DC+12V
• Standby:Display shows:00:00, reply: Normal Open (NO)
• Accumulated time:Yes, add time if receive signals again when time is running
• Max current load: 15A

How it works?
Mode 1:Time runs down after receive signals-> Display shows remaining time and supply power to device-> it cuts off power after time runs out
Mode 2(Connect a button):Display shows remaining time after receive signals-> push button start-> time runs down and supply power to device-> it cuts off power after time runs out
Pause(connect a button): Push button pause: it cuts off power when pause, display shows remaining time. Re-supply power after push button pause again

Setting:
Please follow CODE ON DISPLAY and use button "S1" and "S2" to set up number
INPUT SIGNAL QUANTITY AND TIME
Please press button "S4". “B” flashes. Please set up INPUT SIGNAL QUANTITY to active device (01-50).
Please press button "S4", “A” flashes. Please set up TIME (01-99).
Please press button "S4", “B” flashes. Please set up TIME (01-99).
Please press button “S4” 4 TIMES.
Please set up TIME for Warning Sound.
Please press button "S4" to finish.

GIVEN TIME: Add time by free if input signals reach SETTING RATE during time is running.
Example Setting: input signal to active device: 01, input signals for given time: 03 give time: 02:10
Add time “02:10” free if receive “3 signals” during time is running.
Please press button "S4" 4 TIMES. “B” flashes. Please set up RATE OF INPUT SIGNAL QUANTITY.
Please press button "S4", “A” flashes. Please set up GIVEN TIME.
Please press button "S4", “B” flashes. Please set up GIVEN TIME.
Please press button "S4" to finish. Mode Setting
Please follow table to set up operating function:
Please hold on button "S1" and "S2" simultaneously for 3 seconds to get into MODE SETTING.
Please use button "S1" and button "S2" to set up number for CODE
Please press button "S4" to switch to next code