LIXiSE LXC3110 auto start generator controller small diesel alternator control board pannel generator part

Introduction

LXC31X0 Series automation controller uses 32-bit ARM processor, the module is realized intelligent generator control technology.There are used for genset automation and monitor control system of single unit to achieve automatic start/stop, data measurement, alarm protection.It fit with LCD display, optional languages interface (Chinese, English, Spanish and Russian), and it is reliable and easy to use.It’s achieve a precision measuring,fixed value adjustment, time setting and set value adjusting and etc.All parameters can be configured from front panel or through programmable USB interface via PC. It can be widely use in all types of automatic genset control system with compact structure, advanced circuits, simple connections and high reliability.

LXC3X10：ASM (Automatic Start Module),it controls generator to start/stop by remote signal;

Main features:

1,132x64 LCD with backlight, optional language interface (Chinese, English, Spanish and Russian), push-button operation;

2,Adapt to 3 phase 4 wire, single phase 2 wire, 3 phase 3 wire and 2 phase 3 wire (120/240V), 50/60Hz power supply;

3,The controller Can measure and display 3-phase voltage, 3-phase current, frequency, and power.

4,For mains: Over/under voltage, lack of phase; for generator: over/under voltage, over/under frequency, over current;

5,Precision measure and display engine parameters: Coolant temperature, oil pressure, fuel quantity, charger voltage, and depending on the setting for effective protection of the engine, to avoid accidental damage to the engine;

6,Control protection: Automatic start/stop, switch on/off (ATS control) and fault display;

7,With ETS, idle control, pre-heat control, acceleration and deceleration control, all are relay output;

8,Parameters setting: Allow user to modify parameters and store them in internal EEPROM, which cannot be lost even when power off. All the parameters can be adjusted from the front panel, or by PC via USB;

9,Types of temperature and pressure sensor can be directly used and user defined;

10,Conditions of crank disconnect can be selected.(magnetic pickup, oil pressure, generator);

11,Power supply range is (8~35)VDC, accommodating to different starting voltage;

12,Modular design, flame retardant ABS shell, plug-in terminals, embedded mounting, compact structure, easy installation.