5PCS/Lot 6pcs LED Array IR 10-120 Meters 42mil 850nm PCB Board 98x83mm for Side Door Open Waterproof CCTV Camera Housing 120m

DIY 6pcs LED Array IR 10-120 Meters 42mil 850nm Square PCB Board 98x83mm Hole 32mm Specialized for Side Door Open Waterproof CCTV Camera Housing

​Notice:

1. To get the required IR distance and avoid dark corner on the monitor, please choose the related LED degrees above for your lens.

2. The performance of round LED cap and square LED cap are the same, just different design. We will send round or square LED lenses subject to stock availability. 

Features:

1.  Array IR LED Board for Side Door CCTV Camera Housing, IR 10~120m

2. This LED board is for working with our designated camera casing model of array IR LED board. 

3. Power supply exceeding DC 13V may greatly reduce the LEDs' service life.

4. Matching Lens: 90 degrees - 4mm, 60 degrees - 6mm, 45 degrees - 8mm, 30 degrees - 12mm/16mm (Default 30 degrees or send subject to stock.) --- VERY IMPORTANT!

5. Constant current and voltage design. 

6. Adopt imported high quality lens for even lighting.

7. Working temperature control under 50C degrees.

8. Array LED service life up to 20,000 hours.

9. Power supply control board included. 

10. IR CUT connector available.

​11. IR board size 98x83mm (or refer to diagram), suitable for 32x32/38x38mm

Notice: 

1. DIY CCTV camera parts are only sold to experienced users. If you are not familiar with CCTV camera assembly, we don't suggest you place order. 

2. If you are not sure about the parts size to match each other, please consult us before you place orders. 

3. The product picture is subject to change without prior notice. 

4. CCTV IR lens (IR pass lens) is required to work with IR LED board to collect IR light. 

​5. If the IR LEDs are not powered on, don't worry. It is not quality issue. Please exchange the positions of black and red wires, yellow and white wires, and try again. The LED boards should be fine. 

6. How to use: (a) Connect LED board CDS connector to CCTV camera CDS connector by jump wire. (b) Connect camera pigtail power input connector to LED board DC 12V connector. 

Package Content: 

5x IR LED Board (5PCS/Lot. We will send round or square LED lenses subject to stock availability.)