This product is solvent-free, non-corrosive single-component RTV silicone rubber, has good adhesive properties, excellent electrical insulation properties of the cured, with moisture shock for -60 ~ 250 operating temperature.
use
Mainly applicable to all types of electronic components, instruments, machinery, stone bonding, sealing and coating.
Instructions
First Component do general cleaning, drying, sizing out of this product, plastic materials in contact moisture in the air from the metal hose, ie outside to the inside cured solid whole time no longer than 24h .
Precautions
1. For temperature components, can be cured at room temperature, then at 50 ~ 100 , humidity oven for 4 to 8 hours, rush out of low molecular weight compounds, and fully cured to ensure adhesive performance.
2. This product was potting, a bulk thickness of not too much, if ≥3mm, watering can be layered gradually curing method, the greater the accumulation of glue thickness, longer time to fully cure.
3. This product is in use, the hose should be tightly closed, to save again.
Note: The above data are based on our extensive obtained experimental results are reliable. However, due to the diversity of application conditions of practical application are beyond our control, so users need to be tested before use in order to confirm whether the product is suitable.
