Marantec Digital 221 remote control 433.92mhz Duplicator garage door Marantec remote control 433mhz with battery

Key Words

1.This remote can Duplicator Marantec Digital 221

2.Frequency:433.92Mhz

3.Buttons :4

4.package: A small plastic bag+instruction(Pls tell us your e-mail Then instruction will be send to you .

5.The remote control with battery and key chain

6.Use Range:Garage door,Winder,car alarm etc.

7.Pcs:1

9.

• OEM/ODM orders are accepted;
• Customized logo on back of case and designs are accepted;
• CE-approved

Pay Attentions to

1.if you are not sure whether the remote right for you, you'd better take a photo Then send to us.we will help you

2.This remote control can Duplicator Marantec Digital 221
remote control.Frequency is 433.92Mhz

3.Your remote control image must the same as picture , if not will useless .

4.if you have any questions pls do not hesitate to contact us.

A kind remind:
On the market ,it has many same shell remote ,but pls pay attention on it , shell same not same function ,not same quality ,not same software ,many of them can not copy .
 

Manual:

Step 1 –delete the existing code of our remote duplicator
1)Click and Hold Lock(A)and Unlock(B) buttons together - Led will flash 3 times
2)Keep holding lock (A)button and release unlock(B) button
3)Keep holding lock(A) button and push unlock (B)button 3 times, Led will start flashing Non-stop

Step 2 -  clone your original remote

1)Put both remotes Into back to Back position. Make sure they have direct contact
2)Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will  make  2 blinks then  3 blinks then goes into Steady and you have successfully cloned. ( the left keys follow the same above operation)

If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through.
 
Step 3-Resume the previous code of our remote duplicator
If you carelessly delete the code of remote duplicator, how to do get the memory?
Just follow the bellows :
Press keys C (light) and D(mute) at the same time, until the LED keeps flashing quickly.
Note: 2-key remote duplicator does not have this function.