All Metal 45*45cm 500mW/2500mW DIY Laser Engraver Machine 45*45 Engraving Machine 2Axis Wood Router Mini Marking Machine

All Metal 45*45cm 500mW/2500mW DIY Laser Engraver Machine 45*45 Engraving Machine 2Axis Wood Router Mini Marking Machine 

Input voltage：AC 100V-240V，50 / 60Hz

Output：DC 12V 5A

Engraving area：450mm*450mm

Support software include: weidiao master, GRBL. etc.

Support PWM TTL modulate laser power

Support gray engraving, sketch route cutting, line scanning engraving, spot engraving.etc.

Laser Power: 500mW & 2500mW

​Laser Wavelength: 500mW(405nm) & 2500mW(450nm)

Communication Port: MircoUSB

Laser Quick Replace: Support

Stepper Motor：17HS1352-P4130

Power Input：AC100-240V

Working Voltage：DC 12V

Working Current：DC 4-5A

System Support：Win XP/7/8/10

Engrave Mode：Photo,Word, Scan, outline, Pixel Laser Engraving

Supported Formats: jpg, bmp, svg, G-code

Control Software System: GrblController, LiteFire, Laser GRBL, etc. (Can NOT use Benbox)

Engraving Accuracy：0.01mm

Engraving Area：45x45cm / 17.72 x 17.72inch (maximum)

Engraved Object Height limitation：No Limitation

Function：Ideal for amateur laser engraving usage, equipped with low light positioning and freedom positioning

functions. 45X45cm ultra large engraving area,gantry shape design, no engraving height limitation.

Features：Three stepper motor drive providing faster moving speed.

Laser module with heat sink, high laser engraving power and long term available.

Can print any pictures easily.

Friendly Reminder

1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin!

2. The red cord is DC12v(+),black cord is GND(-), yellow cord is signal(S). Please make sure you know the wire position and connect to the board correctly!

3. The laser module can not be used continuously for more than 30 minutes at a time. If there are any other quality problems (except for damage caused by improper use of the laser), please feel free to contact our customer service.

4. If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module.

5. If you have any quality problems with the machine, please do not initiate a dispute immediately, please feel free to contact us. Many operational issues can be resolved, you can send your problem description to us via image or video. Thank you in advance.

When you received your goods ,please test it in the first time!Test method ,as shown below!

Detail pictures

Laser module:

Test laser:

1,use this cable,connect to your laser and power supply.

2,Use 12V 3-5A power supply.

Laser software:

LiteFire

VigoEngraver_v1.2