Digital Vacuum Wax Injector & Auto Clamp Device, Easy operate high efficiencyWax Injector for Casting Jewelry

Power supply:AC220V,50/60HZ,

Single phase Power:450VA(Max),

pessure range:4-7kg ,

Temperature display range:40-99.9°C,

Temperature adjust range:40-99.9°C

Vacuum time set range :0~9.99sec/0~99.9 sec ,

Wax injecting time set range : 0~99.9 sec ,

Setting time range for warming the machine:0-99hours,

Wax capacity:3 KG,

Temperature precision:+/-0.2 °C,

Dimensions:450(W)*310(D)*450(H)MM.

Features: As the wax mold is injected with wax under vacuum, the filling optimization and thin wax is also very easy to inject. It can control the temperature of wax cavity and wax mouth separately and show with digital for ensuring the correct temperature when wax injection. Heating standby time setting function, the work can be started as soon as wax injection operations, saving both time and electricity, but also improves the work efficiency.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Auto-Clamp Device

Power supply:AC 230V,50/60HZ,Single Phase Power:50VA

Compressed air range:0.25-0.30MPAP Pessure displayed range:0-240KPA

Setting range: 1) One time inject (PRESS1):10-220KPA;

2) Two times inject (PRESS2):10-220KPA;

3) Two times inject and add pressure time for begining(TIME):0-3 seconds;

4) Clamp pressureCLAMP):30-235KPA;

5)Forward pressure(FORWARD):65-235KPA;

6)Holding time(HOLD):0-300 seconds;

Program numbers setting range:setting item 0-9 Times of injecting range:9999 times Dimensions:1)Auto-clamp:157(W)*223(H)MM 2)Control panel:160(W)*260(D)*145(H)MM.

Features:Put the rubber mold to the auto-clamp, input the program number, and press the start button, and then clamp the mold,, go forward, automatic target wax injection at the mouth, vacuum, injection wax casting, clamp open etc, all auto finished. Can be any combination of PRESS1,PRESS2,TIME,CLAMP,HOLD,FORWARD.

NOTE:

1. Coordinate with wax and air compressor.

2. Wax-injecting pressure can be voluntary controlled. Temperature-control is very accurate, 0.2% error.

3. Perfect wax-inject effect. No air bubble, no deckle edge, average wax-out.