3 4 axis TB6560 Stepper Motor Driver CNC Controller Board 3.5A CNC DSP controlled mach3 controller for diy engraving machine
Features:
· Toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset
· 1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step!
· Adjustable drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors
· Overload, over-current and over-temperature safety - Full protection for your computer and peripheral equipment
· On board current switching - Power output can be set according to specific user requirement
· Full closed-type optical isolation to protect the user's computer and equipment
· Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!)
· 4 channel inputs interface- Can be used for XYZ limit and emergency stop
· Professional design - Two stage signal processing with super anti-jamming
· Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range without creep effect
· Four control inputs (divided into pairs of knives) - Allows setting of limit and emergency stop
· Universal architecture - Supports most parallel software MACH3, KCAM4, EMC2 etc!
Dip settings:
| Current Setting |
1 |
2 |
Decay Mode Settings |
3 |
4 |
MicroStep Settings |
5 |
6 |
| 100% |
ON |
ON |
FAST |
ON |
ON |
1 |
ON |
ON |
| 75% |
OFF |
ON |
25% |
ON |
OFF |
1/2 |
ON |
OFF |
| 50% |
ON |
OFF |
50% |
OFF |
ON |
1/8 |
OFF |
OFF |
| 25% |
OFF |
OFF |
SLOW |
OFF |
OFF |
1/16 |
OFF |
ON |
Please Note:
Please connect the power supply to the power switch of DC 12-36 V
Voltage Selection:
> 12-16V DC power supply for Nema 17 stepper motors
> 16-24V DC power supply for Nema 23 stepper motors
> 24-36V DC power supply for Nema 34 stepper motors
The power output of 12V shall be applied to the radiator fan of 12V
Driver output compatible with 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.
Suitable for unipolar or bipolar stepper motors.
Voltage regulated spindle speed controlled by parallel interface as function of supply voltage.
Package Includes:
1 x 3 / 4 Axis TB6560 Stepper Motor Driver
1 x DB25 parallel cable
1 x CD software (English Manual & Mach 3)
