Product Parameters

Model Number : KP3S Build Size: 180*180*180mm Printing Technology: FDM Nozzle quantity: 1 Print precision: 0.05-0.3mm Nozzle: 0.4mm Filament Diameter: 1.75mm Filament: PLA/Wood/TPU/ABS Nozzle Temperature: ≤260℃ Hot bed Temperature: ≤110℃ File type: STL/Obj/Afm Printing via: USB cable and TF card Software: Cura/Slicer/Repetier-Host Operating systems: Win7/8/10/Mac/linux Screen language: CN/EN/RU/ES/FR/IT Movement Speed: 200mm/s Max Print Speed: 100mm/s Print Speed: ≤100mm/s Resume print due to power failure: Yes Filament Motor: Upgradeable Auto Leveling: Upgradeable 3D Touch Machine Power: 240W Rated voltage: 220V-50hz 110V-60hz Power Supply: 24V/15A/360W Machine Size: 280x285x370mm Net Weight: 6kg

Frequently asked questions

1、The nozzle is blocked, the filament can not be extruded, how to deal with? Checking to see the distance between the nozzle and the hotbed is that suitable or not,clear the nozzle (Note: The new nozzle can not use the wrench going inside to clear the nozzle, pls heat the nozzle to 230 degree, the residue will flow out automatically). Meantime pls check the gear and motor shaft working or not. If the motor gear around by the powder, pls clear the powder. Checking to see whether the distance of nozzle is too small, if so, pls recalibrate the hotbed At the same time, you can also increase the printing temperature by 5-10 degrees. Note: pls recalibrate the hot bed after clear the nozzle, because used the wrench to clear the nozzle will lead to the nozzle downward shift and make the distance more small. When the distance is too small, the nozzle will be block up again. 2、Printing models can not be molded, the extruded filament is like a ramen The situation indicates that the distance between the nozzle and the hotbed is too large. Please recalibrate the distance. 3、The nozzle does not extrude the filament, but the filament can be pressed down by hand. The nozzle is heated to 230 degrees to clean the nozzle. When the nozzle temperature reaches 230 degree, the residue will flow out automatically. Then checking whether the gear of the motor is worn due to the long-term use of the gear. Maybe considered to replace the motor gear. 4、The sound of a squeaking noise after the nozzle is fed into the filament The filament is not at suitable position inserted, pls withdrawn the filament, and check whether the broken filament inside the motor gear, pls clear the broken filament and fed into the filament again. 5、X-axis misalignment occurs in half of printing Offline print model misplacement There is a problem with the motor cable or belt The motor line or switch line signal interfered, it is recommended to print a few different models to check again. Checking to see whether the motor cable plug and belt are loose, after checking, printing the model to see whether it still doesn't work. If still not working, pls replace the new line. Online printing: It may be affected by communication anomalies, such as sudden interruption of communication, etc.