CB-150D Hydraulic Copper Busbar Bending Machine, Metal Sheet Bending Tool 15T 150mm

Tonnage:15T

Bending width :150mm

Bending thickness:10mm

Bending capability:150*10mm

Minimum bending angle:90℃

1.Suitable for switch boxes, power strips, automatic control panel wiring project, the use of separate and easy to carry;

2. Copper or aluminum row bending bending angle of 90 degrees to the right, without prejudice to the copper material lighter;
3. Separate operation, with a variety of pump operation;
4. The curved Busbar maximum size of 10mm × 150mm;
5. The machine is equipped with adjustable balance bar to facilitate the use of small copper;
6. On the base of the unit is marked with the mark, the bending angle for an operator to control their own;
7. The machine large tonnage, curvature of large, good electrical conductivity, minimum bending angle of 90 °.
8. Type Horizontal latest output 20TON copper width 150mm Maximum thickness 10mm
9. CB-150D is a portable, while bending the copper bar, N-shaped or L-shaped card can be tied to split
Out, you can row out unimpeded;

10. There is a predetermined angle of 90 degrees, 45 degrees directions, to avoid excessive design.