Lathe Household Micro Lathes Beads Machine Polishing and Polishing Bead Ball Mini Multi-function Tool Woodworking Float Bed

Type : Horizontal
Model Number : Micromachine
CNC or Not : Normal
Condition : New

The high version can add a total of 8 cm thick, 20 cm length of wood.

At present, only 1:1 motor is directly connected, the speed is 800-2000 rpm, stepless speed regulation,

No belt reduction type, the belt 2:1 deceleration is out of stock

The motor is the same motor. The default is the belt deceleration type 2:1 deceleration. The speed range is about 1000-2600 rpm. In addition, the coupling can be customized directly, and the speed is about 2000-5000 rpm. Need high speed to leave a message. Please understand the two transmission methods.

By default, 8 cm thick and 20 cm long wood can be processed. Accept custom size, widen, lengthen, plus wire rod hand wheel, support transformation float bed, spindle and tail top can be customized hollow shaft.

The center has a height of 4.5 cm and can be processed up to 20 cm in length and 8 cm in diameter. The two-axis guide rail uses a 16mm hard shaft. The inner hole of the slider is precision machined and the gold and copper sleeve is fitted inside. Both the main shaft and the tail-drill chuck are of the B12 model with a maximum clamp of 10 mm.

All three packages feature a power-speed integrated controller and two plum thimbles. The controller supports speed regulation, and the speed regulation range is about 1000-2600 rpm, which supports forward and reverse rotation. The controller has 2 built-in fuses, one input 220V, and one output 100-280V DC. When replacing the fuse, please disconnect the control box after power off.

This model can be installed with a saw blade of 75-80mm diameter. And the grinding wheel is available in our shop and the sawing table is under development. . .

Motor power is simple and standard is about 180 watts, high with 350 watt motor. The spindle uses an integrated belt reduction type spindle. The design is ingenious and compact.

Both 180 watts and 350 watts are custom motors. The rotor and the magnetic steel are all reinforced. More than the same type of motor materials used by Taobao.

It is more advantageous than the 775 motor. The 775 motor has a small head, high speed but low torque.

Our two motors, the torque is 10 times (180 watts) and 25 times (350 watts) of the 775 motor. The noise is 1/8 smaller than the 775 motor. This shop has digital display torque meter, power meter, load meter. Various types of multi-channel temperature sensors.

=========================================================== ===========

The simple version does not contain a T-shaped tool holder, does not contain a screw hand wheel, and the motor is 180 watts. Standard with T-barcher and screw handwheel, 180 watt motor. The high-loading not only includes the T-tool holder and the screw hand wheel, but the motor is increased to 350 watts.

The bottom plate is made of 3090 aluminum alloy, and the bottom is equipped with 4 shock-absorbing rubber legs. The length does not include the motor 50 cm, including the motor protruding part assembly 68 cm.

The total height is 14.5 cm.

High match

High with upgraded large motor, including double rail lathe, drill chuck belt deceleration integrated spindle, T-tool holder, screw hand crank, etc., using 350 watts full power motor. Fully wound with pure copper wire, extended rotor, four magnets, this motor is full power compared to other virtual motor. Only the weight of the motor is 1.5 kg.

=========================================================== ==========

Integrated power supply speed controller, our standard 180 watt motor and 350 watt motor are driven by high voltage DC power supply, voltage 100-280V DC, use this controller to support speed regulation, and forward and reverse. The controller has a built-in two-way fuse that protects the controller from damage.