Quantity(Piece/Pieces) | 1 ~ 1000 | >1000 |
Est. Time(days) | 7 | To be negotiated |
If you finish the payment today, your order will ship out within the delivery date.
Description
1.This numerical control liquid filling machine is compact and portable. The casing uses stainless steel so it is durable and easy to clean. The machine has a self-prime pump that can suck in the liquid from your container and then output via the nozzle. It can be used to fill many different types of clear thin liquid,including water, olive oil, fuel, drinks, vinegar, milk etc.
2.Liquid suitable: low viscous liquid like water, solutions etc. Liquid unsuitable: very thick liquid (sauce,detergent etc), or liquid containing small particles. It is not suitable for filling liquid that has alcohol.
Parameter
Voltage |
AC 220V,110V 50/60HZ |
Power |
40W |
Filling Range |
5ml-3200ml |
Max Flow Rate |
2.8L/min (water) |
Dimension |
360x255x170mm |
Diameter of Filling Nozzle |
Φ 8mm |
Max Suck Distance |
2m |
Repeat Error |
<0.5% |
Anti-dripping Function |
Available |
Memory Function without Electricity |
Available |
Suitable Soft Tube |
17#(interior diameter: 6.4mm, thickness: 1.6mm, max pressure0.24Mp) |
1. Different liquid needs to choose different material of tube. The tube provided by us is silicone tube.
2.We will test all of the filling machine before send out , so it’s normal that the machine pump and tube with water inside when you receive it.
We upgrade this filling machine,the dimension is smaller than before one.Functions are same as before machine.Please notice that the USA customer and RU customer may receive the old filling machine since we ship them randomly.
Packing List
1.Power Cord 1pcs |
6.Screwdriver 1pcs |
2.Pedal Switch 1pcs |
7.Inner hexagonal wrench 1pcs |
3.Filling Stand 1pcs |
8.Manual Book 1pcs |
4.Filter 1pcs |
9.Guarantee Receipt 1pcs |
5.Filling Nozzle 1pcs |
10.Quality Certificate 1pcs |
Installation
Take the plastic filling nozzle out and install it in the feeding tube. (Notice the triangle head connects the discharge tube). Take out the filling-head stand and install it on the left of the machines. Put the filling head in the clip and tighten it by socket wrench.
Connect the pedal switch with machine, and put the tube with filter below the liquid level inside the storage rank. The position of tank should be lower than the machine. Start to test the machine after all is ready.