NEW Convoy BD04 zoomable flashlight CREE XML2 U2 LED 18650 LED flashlight ,torch,lantern,self defense,camping light, lamp

Old version with 3/5modes

Specification

About LED tint & Driver 

XML2 U2-1A 6500-7000K

XML2 T6-3B 5000-5200K
XML2 T6-4C 4300-4500K
XML2 T5-5B 4000-4200K
XML2 T4-7A 3000-3200K

 

Switch-direct-rechargeable series flashlight manual

Thank you for purchasing this product, please read this manual in detail before using this product .

Warning!

Do not turn on the torch in front of people 's eyes ! Otherwise it will cause temporary blindness !

You can find out the charge-state by observing the reflector.(Turn off the flashlight)

1. Features

1.         This series of products use the following proprietary patented technology:" Integrated switch-direct-rechargeable structure" ( Patent No. 201320292675.9 ),and use high performance LED and intelligent driver.

2.         In addition to energy efficient, durable , this flashlight has the following characteristics :

3.         This flashlight can be recharged without removing the battery,you just connect the switch with the charge-connector,then use the USB to microUSB cable to connect the 5V power.

4.         You can click the charge-connecter to make the flashlight work when charging.

5.         Charge-connector firmly clasps the switch non-magnetically.

6.         The driver has battery-protection and charging display function.

7.         The driver is intelligent ,supplies constant current,has three lighting modes and two flash modes,has Low-voltage alarm function and memory function.

8.         The pill is integrated the host to make the heat of LED spread faster.

9.         The host is made of aviation aluminum.HA oxidative surface,good wear properties.

10.     The reflector is made of aviation aluminum.Vacuum Coating

11.     IPX-7 waterproof

2. Applications

This series of products have a wide range of applications, suitable for outdoor lighting , home lighting, emergency lighting and a long patrol lighting.

3.Flashlight structure and charging accessory diagram

The Switch is divided into two categories:side-switch and tail-switch

(see the following diagram).

4.Operating instructions

1.         The battery installation:screw the tail,the put the battery in.Notice!Battery positive towards the torch head(side switch), Battery positive towards the torch tail (tail switch)

2.         Charge:connect the switch with the charge-connector,then use the USB to microUSB cable to connect the 5V power.  Notice!When charging is completed,unplug the microUSB port first ,then remove the connector.

3.         Charging indicator:indicator emits red light when charging,emits green light when full charging.indicator in the reflector(side switch flashlight),indicator on the tail(tail switch flashlight)

4.         Charging adapter:5V power.For example:phone adapter,PC USB port,mobile power etc.

5.         Switch operating:click the button to turn the flashlight on or off. Gently click the switch to choose modes.the brightness depends on the current when the battery is low-voltage or turning on the flashlight in the state of charge

6.         Modes:low-middle-high-stobe-SOS,the mode can be remembered if turnning on the flashlight above 4 seconds.

7.         Low voltage alarm:when the voltage is below setting value, LED twinkles.the batteries must be charged at this time.

8.         Battery storage:remove the battery from the flashlight if you dont use the flashlight for a long time.Battery should be full charged once every month if you dont use it chronically.

Maybe a little difference between the manul and the product, please adhere to the original products in case of any mistake!