Taiwan pneumatic bend screwdriver
Origin TAIWAN manufacture
LAOA , trust the brand power
Long service life
High quality
Big torque
Product parameter
5.5HL 90 degree pneumatic screwdriver
8HL 90 degree cured bend pneumatic screwdriver
Parameter comparision
Model LA184255 LA184280
Twist screwdriver ability 5mm 8mm
Torque 90kgf/cm 126kgf/cm
Air inlet 1/4"
1/4"
Inner diameter of tube 3/8"
3/8"
No-load RPM 8500rqm 7200rqm
Air pressure 91psl 90psl
Air consumption 2cfm 2cfm
Net weight 1.1kg 1.36kg
Apply to bits H6.35mm H6.35mm
Origin TAIWAN TAIWAN
Product analysis
Brand new appearance design.small volume,easy to take
A:Hang hook
B:Speed twist rotate
C:Forward and reverse switch
D:Laser LOGO
E:90 Degree bend head
F:Elastic ball type chuck
G:Open switch
H:Coherent port
LAOA only produce quality products
If you are a real purchaser,choose quality,not quantity
Good quality
all wool and a yard wide
Details:
01: 90 degree bend head design
suit for using in narrow place
02:Cr-V steel double knocking block
Made by CR-V,large torque and more longer service life
03:3 gears air control value
Through adjust value,to control the volume of air inlet,to change torque and rqm
04:Exhaust
Profession 6 hole design,smoothly exhaust
05:Forward and reverse switch
Indicate forward,R indicate reverse
The design makes your work more easy
06:Filter net
Stainless steel to prevent the sundries,roll into screwdriver and damage it
Using suggestions:
Drip 2-3drops lube oil before and after using it
After drip oil,please let the machine operate several seconds automatically
The air source always contain water and lube oil compress from traditional compressor.if there is no tools seperate water and oil,
they will go to machine with air,and makes the fan blade stick togther.
The machine may not work because it can not seperate the fan blade.
If the machine can work,it also may makes the torque not enough.
Please must drip oil from back and idling seconds.torque will recover