Product Parameters
13 inch woodworking planer
2000N full copper motor. Can be connected to the vacuum cleaner. Planable long material
Double dust. Vacuum cleaner
Direct dust extraction is better, connect the vacuum cleaner to plan low dust
Vacuum cleaner
If you need to add a dust cover to connect the vacuum cleaner, please inform customer service.
2m long planing with bracket
If you need to plan longer materials, it is recommended to make your own support table.
Product Name: 13 inch press machine
Product model: M1B-LS-3301
Rated voltage: 220V
Rated power: 2000W
No-load speed: 80r/min
Single creation: 1-3mm
Planing height: 10-160mm
Planing width: 330mm
Base material: aluminum cast base
Packing size: 572X377X455mm
Woodworking machinery safety knowledge ** Woodworking machinery and equipment are dangerous mechanical equipment, which is easy to cause injury.
(1) There are four main reasons for the occurrence of woodworking machinery accidents:
1. The working shaft of the woodworking machine has a high rotational speed and a large rotational inertia, which makes it difficult to brake. In order to stop the motor as soon as possible after the motor stops, the operator is often used to braking with a hand or a wooden stick, often causing injury due to inadvertent contact between the hand and the rotating tool.
2. Woodworking machinery mostly uses manual feeding, which is the reason for the latent injury. When the hand pushes the wood into the feeding, due to thrift, bending or other defects, the hand and the cutting edge are unconsciously in contact and cause injury.
3. The woodworking machinery has a high rotation speed, and the uneven wood is processed. The noise is large during the cutting process, the vibration is large, the labor intensity of the workers is large, and fatigue is easy. These factors are all easy to cause the operator to make mistakes and cause damage.
4. The operator is not familiar with the performance and safe operation technology of woodworking machinery, or does not operate according to the safety operation rules. In addition, the woodworking machinery equipment does not have safety guards installed or the safety guards fail, which is very likely to cause injury accidents.
(2) The main measures for preventing woodworking machinery accidents are as follows:
1. All kinds of woodworking machinery and equipment should be equipped with effective braking devices, safety protection devices and dust collecting and chip removal devices.
2. During the use of woodworking machinery, it must be ensured that no harmful vibrations will be generated when using any tool at any cutting speed to avoid danger during operation.
