Hot Air Gun 300W Electric Mini Handheld Heat Gun Repair Tool DIY Crafting Power Tool Phone Repair US/EU/UK/AU Plug

Description：

100% Brand New and High Quality
Can be used to heating relief powder and shrinkable sheet
Keeping 3-5cm distance from work and about a 45 degree angle to heat until it is completed.
After completion, use the heat gun at high temperature to blow a few seconds
It not only can add its hardness, but also its brightness
The temperature can not adjustable, in theory, it can reach at 200 degree within a few seconds
Do not work over 10 minutes, blow at 45 degree angle to avoid heat suck
Be careful when using the hot air gun

Specification:

Color: White
Material: ABS
Type: Constant temperature
Working temperature: It can reach at about 200°C / 390°F within a few seconds
Rated power: 300W
Power type: AC power supply
Rated voltage: 230v
Power:50Hz
Working time: 8 minutes

Usage:

1.Plug in the heat tool
2.Hold the gun but do not touch the hot nozzle
3.Keep 5-6cm distance between the heat gun and your work, about 45° for heating until the completion of the work
4.Turn off the power to stay cool

Notes:

1.This kind of gun can not adjust the temperature but it heats up quickly at about 200℃ theoretically.
Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
2. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.

Packing details:

1*Hot Air Gun

Product Pictures：