Aluminum Alloy Ups Uninterruptible Energy Storage Power Supply Support Solar Charging Outdoor Mobile Power Mini Ups for Router

• European countries, UK and US will include freight and tariff

The existing150W/200W/300W/500W/1000W/2000WAnd more power new portable solar energy storage inverter power supply!

Basic parameters of this model: 220V/12V/5V AC/DC output,SustainableRated 500W output and 1000W peak power.

Note:Products are divided110V/60HzAnd220V/50Hz The two AC voltage output versions should be purchased according to the local voltage frequency.

Three ways of charging energy storage backup power G500:

1. Through the power supply line

■ Please use the original power cord. When charging, the AC charging indicator light is luminous red, and it turns green when full.

2.   Through solar panels

■ The solar panel used should be less than 18V 150W, the charging indicator light is red when charging, and it turns green when full.

3.    By car charger

■ Please use 12V car charger, and 24V car charger is forbidden.

Product Highlights explanation:

1. The power supply can be used while charging. Four AC output ports are designed,Sustainable supply of pure sine wave alternating currentFor all kinds of household appliances and outdoor equipment.

For example, unmanned aerial vehicle, portable computer, electric skateboard, balance car, air pump, mini printer, various lights, fish tank heater, photography equipment, breathing machine, communication equipment, medical equipment, etc.

It is suitable for daily occasions such as driving travel, open work, camping picnic, mountaineering adventure, fire fighting and emergency rescue, military exercises, etc.

2.4USB 5VOutput and 3DC 12VOutput and 1TYPE-COutput interface to meet daily charging of various low voltage digital devices.

3. Pure imported IC and high-quality components lay a solid foundation for the product. The internal circuit board is designed with multiple protection circuits, and is equipped with 3 cooling fans independently to meet the requirements.Sustainable 500W high power outputWithout affecting stability and security.

On the market a lot of isRepair sine wave, what is the difference between pure sine wave and repair sine wave?

Only pure sine wave can be called sine wave. The so-called modified sine wave is closer to square wave.

Pure sine wave

Repair sine wave (square wave)

In simple terms:

1. Pure sine wave is better than sine wave repair. Although the price is high, it can adapt to various loads,Electrical without damage, especially household appliances and motor loads. The sine wave repair is generally only a simple treatment of rectangular waves. Generally, the output is still rectangular waves. Rectangular waves cannot drive non-resistive loads completely normally, and they will damage each other with inductive loads. If they are not started, high heat, abnormal sound, over current, breakdown and so on reduce the service life of electrical appliances. This is the defect of waveform, which cannot be made up and cannot be changed by any manufacturer.

2. Sine wave inverter and correction wave inverter are also different in internal circuit. Firstly, the sine wave inverter must be dominated by software and modulated by inductance and capacitance due to the problem of waveform modulation. Therefore, in the sine wave inverter, single chip microcomputer and inductance must be needed, which is well known at a glance. The technical difficulty is far higher than correction wave inverter. Therefore, the price of sine wave inverter is much higher than correction wave inverter.